The lifespan of a metal roof, facade or sheet metal part depends not only on the thickness of the steel but also on its surface protection system. Depending on the intended use, the steel can be protected with a metallic zinc or aluminium-zinc coating, an organic paint coating or a multi-layer decorative coating. The TOODE range includes several types of materials and coatings – from classic painted coatings to a natural metal look and decorative Printech patterns.

Each material has a different surface texture, corrosion and UV resistance, mechanical strength, formability and intended use – the most suitable one should be chosen according to the location of the building, the effect of the environment, the roof or facade structure and the look you want. The current TOODE colour and coating combinations are summarised in our colour chart.

What do RC and RUV mean?

RC is the corrosion resistance class of an organic coating. The higher the RC class, the better the roof coating protects the steel against corrosion in the corresponding service conditions. RUV describes the resistance of a paint coating to ultraviolet radiation – mainly changes in colour and gloss over the long term. The RC and RUV classifications are used for coated steel materials according to EN 10169. They are not applied in the same way to natural zinc and AlZn metallic coatings. SSAB coated steels are produced according to EN 10169.

Coloured coatings

Polyester – polyester coating

Polyester is a versatile and economical coated steel finish, widely used to make roof and wall profiles, sheet metal parts and other building products. The coating has a smooth surface and is easy to work. Polyester is a suitable choice for homes, outbuildings, production and other buildings in normal service conditions. If the building is in a more aggressive environment, or long-term colour retention is especially important, a higher-performance coating is recommended for the roof.

  • Coating thickness25–30 µm
  • Corrosion resistanceRC3
  • UV resistanceRUV2–3
  • Scratch resistance20 N
  • Max. service temperature90 °C
  • Min. working temperature0 °C
  • Zinc coatingZ275
  • TOODE technical warranty30 years
  • TOODE aesthetic warranty10 years
Available colours
RR11RR20RR21RR22RR23RR25RR28RR29RR30RR31RR32RR33RR35RR36RR37RR40RR41RR750

MATT POL – matt polyester coating

MATT POL is a polyester-based coating with a matt, textured surface. It is especially suitable for roof profiles where, in addition to protection, a discreet matt look is important. The coating keeps good profiling properties and is suitable for tile profiles and other roofing materials. The SSAB Rough Matt Polyester product group was also developed specifically for roof profiles and is characterised by a matt surface and good profiling properties.

  • Coating thickness35 µm
  • Corrosion resistanceRC4
  • UV resistanceRUV3
  • Scratch resistance25 N
  • Max. service temperature90 °C
  • Min. working temperature0 °C
  • Zinc coatingZ350
  • TOODE technical warranty30 years
  • TOODE aesthetic warranty15 years
Available colours
RR23RR32RR33

GreenCoat Pural BT

GreenCoat Pural BT is a high-performance SSAB coated steel for roofs and facades that need high resistance to corrosion, UV radiation and mechanical wear. The material can be formed at temperatures down to −15 °C. GreenCoat Pural BT uses SSAB Bio-based Technology (BT), in which part of the fossil raw materials traditionally used is replaced with renewable raw materials, including rapeseed oil. The lightly textured surface gives a high-quality look and good mechanical strength – suitable for residential roofs, profiled roofing, facades and other buildings where durability is the priority.

  • Coating thickness50 µm
  • Corrosion resistanceRC5+
  • UV resistanceRUV4
  • Scratch resistance40 N
  • Max. service temperature100 °C
  • Min. working temperature−15 °C
  • Zinc coating Z350
  • TOODE technical warranty50 years
  • TOODE aesthetic warranty25 years
Available colours
RR20RR21RR22RR23RR32RR33

GreenCoat Pural BT Matt

GreenCoat Pural BT Matt combines the high protection of Pural BT with a distinctly matt, textured surface and a gloss level below 5. Its high UV resistance makes Pural BT Matt especially suitable for roofs and facades where both long-term corrosion protection and lasting colour and matt appearance matter.

  • Coating thickness50 µm
  • Corrosion resistanceRC5+
  • UV resistanceRUV5
  • Scratch resistance40 N
  • Max. service temperature100 °C
  • Min. working temperature−15 °C
  • Zinc coating Z350
  • TOODE technical warranty50 years
  • TOODE aesthetic warranty25 years
Available colours
RR11RR23RR2H3RR29RR32RR33RR750

PVDF – GreenCoat Hiarc

The main advantage of PVDF-type coatings is very high resistance to UV radiation and long-lasting retention of colour and gloss. The hard Hiarc surface is also easy to clean and well suited to architectural uses where lasting visual quality is especially important. PVDF coatings are often used on facades that are exposed to strong sunlight for long periods.

  • Coating thickness27 µm
  • Corrosion resistanceRC4
  • UV resistanceRUV5
  • Scratch resistance30 N
  • Max. service temperature110 °C
  • Min. working temperature−10 °C
  • Zinc coatingZ275
  • TOODE technical warranty40 years
  • TOODE aesthetic warranty25 years
Available colours
RR40 – silver metallicRR41 – dark silver metallic

PVC – SSAB P200

PVC, or plastisol, coating differs from the other TOODE coated materials by its especially thick protective layer and embossed surface. The strengths of P200 are the thick coating, mechanical strength and good corrosion protection, and its formability is very good – SSAB gives a minimum inner bending radius of 0 × sheet thickness. Its UV resistance class is RUV2.

  • Coating thickness200 µm
  • Corrosion resistanceRC5
  • UV resistanceRUV2
  • Scratch resistance45 N
  • Max. service temperature60 °C
  • Min. working temperature+10 °C
  • Zinc coatingZ275
  • TOODE technical warranty10–30 years*
  • TOODE aesthetic warranty10 years
Available colours
RR20RR21RR23RR32RR33

Technical comparison of coated finishes

Property Polyester MATT POL Pural BT Pural BT Matt PVDF / Hiarc PVC / P200
Coating thickness 25–30 µm 35 µm 50 µm 50 µm 27 µm 200 µm
Surface Smooth Matt, textured Textured Matt, textured Smooth Embossed
Corrosion resistance RC3 RC4 RC5+ RC5+ RC4 RC5
UV resistance RUV2–3 RUV3 RUV4 RUV5 RUV5 RUV2
Scratch resistance 20 N 25 N 40 N 40 N 30 N 45 N
Max. service temperature 90 °C 90 °C 100 °C 100 °C 110 °C 60 °C
Min. working / forming temperature 0 °C 0 °C −15 °C −15 °C −10 °C +10 °C
Metallic base coating (TOODE) Z275 Z350 Z350 Z350 Z275 Z275
Technical warranty* 30 years 30 years 50 years 50 years 40 years 10–30 years
Aesthetic warranty* 10 years 15 years 25 years 25 years 25 years 10 years

* Whether a warranty applies, and its scope, depends on the specific product, the location of the building, the effect of the environment, installation, use, maintenance and other warranty terms.

Metallic coatings

Galvanised steel – Zn Z275 and Z350

Galvanised steel has no decorative polymer paint coating – the steel surface is protected by a hot-dip zinc layer. Zinc protects steel in two ways: first, it forms a physical barrier between the steel and the environment; second, zinc gives galvanic, or cathodic, protection – near small surface damage and cut edges, the zinc corrodes before the steel base. Z275 means that the minimum total zinc mass on both sides of the sheet is 275 g/m² (typically ~20 µm on each side). Z350 means a minimum of 350 g/m² in total (typically ~25 µm on each side) – a larger zinc protection reserve than Z275. In the TOODE range, galvanised material comes with either a DX51D steel base (a widely used formable steel grade for construction profiles and parts) or a TSP steel base (an SSAB material designed specifically for sheet metal work and complex bending, where very good formability and minimal springback are essential) – these designations do not describe the amount of zinc, but the properties and formability of the steel base. Galvanised steel is suitable for roof and wall profiles, sheet metal parts, technical and industrial structures, outbuildings and other uses where no decorative paint coating is needed. As the material has no organic paint layer, the RUV classification does not apply to it.

  • Zinc coating (mass)Z275 / Z350
  • Typical thickness per side~20 µm / ~25 µm
  • Steel baseDX51D / TSP
  • AppearanceNatural metallic surface

AlZn – aluminium-zinc alloy coating

AlZn is steel with a metallic aluminium-zinc alloy coating. It combines the long-term barrier properties of aluminium with the galvanic protection of zinc. A 55% Al-Zn type coating consists of about 55% aluminium, 43.4% zinc and 1.6% silicon. KG Dongbu Steel describes its 55% Al-Zn SuperGalum material as a coating with good long-term durability, heat resistance, formability and heat-reflecting properties; the manufacturer also states higher corrosion resistance than ordinary galvanised steel with the same coating thickness. The AlZn surface is silvery metallic and is used without a decorative paint coating. TOODE offers it for roof and wall profiles and other solutions where a natural metal surface is wanted. As with galvanised steel, the RUV classification for organic paint coatings does not apply to AlZn.

  • Coating composition~55% Al, 43.4% Zn, 1.6% Si
  • TOODE sheet thickness0.50 mm
  • AppearanceSilvery metallic surface

Comparison of metallic materials

Property Galvanised Z275 Galvanised Z350 AlZn
Coating type Zinc Zinc Al-Zn-Si alloy
Coating mass 275 g/m² 350 g/m² not specified
Typical thickness per side ~20 µm ~25 µm not specified
Coating composition mainly Zn mainly Zn ~55% Al, 43,4% Zn, 1,6% Si
Main protection principle barrier + galvanic protection barrier + galvanic protection Al barrier protection + Zn galvanic protection
Surface Natural metallic Natural metallic Silvery metallic
Sheet thickness available from TOODE 0,45 – 0,60 mm 0,45 – 0,60 mm 0,50 mm
Steel base DX51D / TSP u.c. DX51D / TSP u.c. according to the delivery specification

The mass and typical layer thickness values for Z275 and Z350 follow SSAB EN 10346 information.

Decorative Printech materials

Printech is industrially coated and printed steel on which wood, stone, brick, metal and other decorative patterns can be created. TOODE Printech materials are supplied by KG Steel. Unlike a stick-on film, the Printech pattern is created during the industrial coated steel production process – in a multi-layer system with a metallic base coating, pretreatment, primer, base (barrier) coating, the printed pattern and a protective clear coating. The material is intended for both exterior and interior finishing.

Printech Wood – PW371

Printech Wood PW371 imitates a natural wood surface while keeping the practical properties of profiled steel. It is suitable for facades, roof profiles and various architectural elements where the look of wood is wanted without the regular painting and maintenance natural wood needs. KG Steel Printech technology is especially suitable for creating wood patterns, and the manufacturer also offers textured clear-coat solutions so that the wood surface looks and feels more like the natural material.

  • DesignPW371
  • PatternWood surface

Printech FineStone – PB074

Printech FineStone PB074 is a decorative printed steel with a fine stone-like pattern. It is intended for buildings where a surface resembling natural mineral material is wanted, while using the advantages of profiled steel – low structural weight, profilability and simple installation. KG Steel officially lists stone patterns as one of the standard uses of Printech technology.

  • DesignPB074
  • PatternStone surface

Printech Camo – PX131

Printech Camo PX131 is a decorative steel material with a camouflage pattern. It is suitable for non-standard architectural, agricultural, technical and other buildings where a visually striking metal finish, or one that blends better into the surroundings, is needed. As with the other Printech materials, the decorative pattern is part of an industrially produced multi-layer coating system, not a film stuck onto the material.

  • DesignPX131
  • PatternCamouflage

Colours and designs available from TOODE

Material / coating TOODE standard colours / designs
Polyester RR11, RR20, RR21, RR22, RR23, RR25, RR28, RR29, RR30, RR31, RR32, RR33, RR35, RR36, RR37, RR40, RR41, RR750
MATT POL RR23, RR32, RR33
Pural BT RR20, RR21, RR22, RR23, RR32, RR33
Pural BT Matt RR11, RR23, RR2H3, RR29, RR32, RR33, RR750
PVDF RR40, RR41
PVC RR20, RR21, RR23, RR32, RR33
Galvanised Zn Natural metal surface
AlZn Natural metal surface
Printech Wood PW371
Printech FineStone PB074
Printech Camo PX131

This breakdown matches the currently published TOODE colour chart.

How to choose the most suitable material?

  • Polyester is a versatile and economical solution for standard roof and wall profiles and sheet metal parts.
  • MATT POL is suitable if you want a matt surface and higher corrosion resistance than standard Polyester.
  • Pural BT is a high-performance solution for roofs and facades where long-term corrosion protection and mechanical strength are the priority.
  • Pural BT Matt offers the same high corrosion resistance with a matt look and RUV5 UV resistance.
  • PVDF is especially suitable for buildings where very good colour and gloss retention under long-term UV exposure is essential.
  • PVC stands out with its especially thick 200 µm coating and high mechanical and corrosion resistance, but its UV resistance is lower than that of Pural BT Matt or PVDF.
  • Galvanised steel is a practical solution for profiles, sheet metal parts and technical structures where no decorative paint coating is needed. Z350 gives a larger zinc protection reserve than Z275.
  • AlZn combines the barrier properties of aluminium with the galvanic protection of zinc and is suitable for roofs and walls with a natural metallic look.
  • Printech is suitable when profiled steel needs a decorative wood, stone or camouflage pattern.

Need advice?

The actual specification of some materials may vary depending on the manufacturer, the delivery batch and the specific product. If the project specifies a particular steel grade, sheet thickness, metallic coating mass, polymer coating thickness, RC/RUV class or other technical requirement, we will confirm it together with you before ordering.

Contact a TOODE specialist