Product categories
Transport services
If needed, we deliver roofing materials safely to your site. Ask for this service when you order!

Snow guards stop snow and ice from sliding off the roof uncontrollably – they protect people, cars and the rainwater system. TOODE offers tubular snow guards with brackets for metal roofs, clay and concrete tiles and asbestos-free slate, in the same RR colours as the roof.

Snow guards for every type of roofing

The main difference between snow guards is the bracket – it has to be chosen according to the roofing, so that the snow guard holds securely and the roof is not damaged.

Roofing How it is fixed
Trapezoidal and other profiled metal roofs universal bracket in the bottom wave of the profile, with 6.5 × 38 mm screws with sealing washers
Tile profile bracket shaped to fit the profile
Classic at the profile joint with a clamping plate and M8 × 30 screws
Standing seam profile on the seam, without drilling – the roof stays watertight
Clay and concrete tiles under the tile, to the roof batten – the tiles are not damaged
Asbestos-free slate (Eternit) under the sheet, to the batten; the top is screwed with 6.5 × 50 mm screws with sealing washers

How many brackets you need

  • For one 3 m snow guard section – 4 brackets.
  • For two joined sections (6 m) – at least 7 brackets.
  • If the roof slope is longer than 10 m, it is best to install snow guards in two or more rows.
  • With a bracket extension, you can add an extra snow guard or install it higher – this is also useful for roofs with solar panels.

Each product page also has an installation video.

For working safely on the roof in winter, roof ladders and a roof walkway are also useful.

Frequently asked questions

Which snow guards does a metal roof need?

The bracket has to be chosen according to the profile: the universal bracket for trapezoidal roofs, and a separate bracket each for the tile profile, Classic and the standing seam profile. Clay tile and slate roofs have their own brackets that are fixed to the batten.

How many brackets does one snow guard need?

4 brackets are recommended for one 3 m section, and at least 7 for two joined sections (6 m).

Do I need to drill the roof to install snow guards?

For the standing seam profile – no, the bracket is clamped onto the seam. The Classic bracket is fixed at the profile joint with a clamping plate. On trapezoidal and slate roofs, the bracket is screwed on with screws with sealing washers that seal the fixing point.

Can snow guards be installed on a roof with solar panels?

Yes. Because of the solar panels, the snow guards have to be installed higher – a bracket extension makes this possible.

What colours are snow guards available in?

In the colours of the TOODE RR catalogue, the same as metal roofing, and in other colours to individual order.