A trapezoidal profile is a profiled steel sheet for roofs and walls, fixed with screws. TOODE offers three heights – TP15, TP20 and TP45 – in the length you need and with different coatings. We will help you choose the most suitable profile and calculate the quantity for your building.
Which trapezoidal profile to choose?
The main difference is the height of the profile. The higher the wave, the higher the load-bearing capacity and the larger the spans between supports. TP15 is for walls only, while TP20 and TP45 are for both roofs and walls.
|
TP15 |
TP20 |
TP45 |
| Use |
walls |
roofs and walls |
roofs and walls |
| Versions |
A, B, V – walls |
R – roof, A, B – walls |
R – roof, A, B – walls |
| Profile height |
13 mm |
18 mm |
41 mm |
| Cover width |
1134 mm |
1100 mm |
900 mm |
| Material thickness |
0.45-0.70 mm |
0.45-0.60 mm |
0.45-0.70 mm |
| Length |
500-5800 mm |
500-8500 mm |
500-10 000 mm |
| Minimum roof pitch |
not for roofs |
10° (8° with a double side overlap) |
10° |
| Suitable for |
facades with a clean, discreet look |
a versatile solution for roofs and walls |
industrial, agricultural and public buildings, large rafter spacing |
| More |
Trapezoidal profile TP15 |
Trapezoidal profile TP20 |
Trapezoidal profile TP45 |
TP20 is also available as TP20 + DRIPSTOP ORIGINAL.
Coatings
All trapezoidal profiles are available with the following coatings: galvanised, Polyester, Matt Pol, Pural BT, Pural BT Matt and PVDF. The choice of coating depends on the location of the building, the look you want and the expected lifespan.
How a trapezoidal profile is fixed
A trapezoidal profile is fixed with screws in the bottom of the wave to the battens or to the load-bearing steel structure. For roofs, the R version is used – its shape is designed to drain rainwater down the roof slope; for walls, the A or B version.
What else a roof needs
A complete roof also needs sheet metal flashings, snow guards, roof ladders and a roofing membrane. See other roofing under metal roofing.
What is the difference between TP15, TP20 and TP45?
The profile height is different: TP15 is 13 mm, TP20 is 18 mm and TP45 is 41 mm. TP15 is for walls only, TP20 is a versatile profile for roofs and walls, and TP45 with its high wave is suitable for large rafter spacing and large buildings.
Which trapezoidal profile should I choose for a roof?
TP20 R and TP45 R are suitable for roofs. TP20 is a versatile solution; TP45 is chosen when a higher load-bearing capacity and larger spans between supports are needed.
What is the minimum roof pitch for a trapezoidal profile?
The minimum roof pitch for TP20 and TP45 is 10°. TP20 with a double side overlap can be used from 8°.
How long can trapezoidal sheets be?
TP15 is 500-5800 mm long, TP20 500-8500 mm and TP45 500-10 000 mm.