Product categories
Transport services
If needed, we deliver roofing materials safely to your site. Ask for this service when you order!

A roof walkway is a safe path across the roof for maintenance, chimney sweeping and technical inspections. TOODE roof walkways come in 3000 mm and 1200 mm lengths, with brackets for all types of roofing and in the same RR colours as the roof.

Roof walkway brackets for every type of roofing

The roof walkway bracket has to be chosen according to the roofing, so that the walkway holds securely and the roof is not damaged.

Roofing How it is fixed
Trapezoidal and other profiled metal roofs universal bracket – the same system as for snow guards, with 6.5 × 38 mm screws and sealing washers
Tile profile tile profile bracket with 6.5 × 38 mm screws with sealing rings, with roof walkway seals underneath
Classic at the profile seam with a counter plate and M8 × 30 mm screws, without screwing through the roofing
Standing seam profile on the seam with a counter plate, without screwing through the roofing
Clay and concrete tiles hooked behind the roof structure and screwed to the batten
Asbestos-free slate (Eternit) the end under the sheet to the structure, with 6.5 × 50 mm screws and a sealing washer

How many brackets you need

  • For a 3000 mm walkway – 4 brackets.
  • For a 1200 mm walkway – 2 brackets.
  • The roof walkway bracket has several fixing points, so the angle of the walkway can be adjusted to the roof pitch to make walking on it comfortable.

In all systems, the walkway bracket is joined to the base bracket and the walkway itself with M8 × 30 mm screws. The installation is shown step by step on each product page.

For safe access to the roof, roof and wall ladders are also useful, and for winter – snow guards.

Frequently asked questions

What lengths are roof walkways available in?

3000 mm and 1200 mm, in the colours of the TOODE RR catalogue, and in other colours to individual order.

How many brackets does a roof walkway need?

A 3000 mm walkway needs 4 brackets, a 1200 mm walkway 2 brackets.

Do I need to drill the roofing to install a roof walkway?

For Classic and the standing seam profile – no, the bracket is fixed to the seam with a counter plate. On trapezoidal, tile profile and slate roofs, the bracket is screwed on with roofing screws with sealing washers that seal the fixing point. On clay and concrete tile roofs, the bracket is screwed to the batten, and a hole is drilled in the tile above it and the tile is screwed on.

Can the angle of the roof walkway be adjusted to the roof pitch?

Yes. The roof walkway bracket has several fixing points, so the walkway can be fixed at the angle you need.