Product categories
Transport services
If needed, we deliver roofing materials safely to your site. Ask for this service when you order!

A roofing membrane, or underlay, is the layer between the roofing and the roof structure – it protects the roof from water, wind and condensation. TOODE offers high-vapour-permeability breather membranes, an anti-condensation underlay and a bitumen underlay. We will help you choose the most suitable membrane for your roof structure and calculate the quantity together with the other roofing materials.

Breather membrane or anti-condensation underlay?

Both serve as a roof underlay, but they work in opposite ways. A breather membrane lets moisture out of the structure but does not let water in from outside. An anti-condensation underlay does not let moisture through – it absorbs the condensation that forms on the underside of metal roofing, and it gradually dries out in the ventilation gap.

Breather membrane Anti-condensation underlay
Products MAXI 140, MAXI 140 SK2, SUPER 180 SK2 ANTICON 130
Vapour permeability very high (Sd ~0.02 m) low (Sd ~40 m)
Gap to the insulation not required (we recommend a few cm) required, at least 5 cm
Fully boarded roofs suitable not suitable
Best choice for insulated and energy-efficient roofs ventilated metal roofs where condensation is the main risk

In short: if the roof is insulated and you want a simpler structure, choose a breather membrane. If it is a ventilated metal roof and you need protection from dripping condensation, ANTICON 130 is suitable. Under bitumen shingles, slate and wooden shingles on a fully boarded roof, the bitumen underlay BITUMI 450 is used.

Roofing membrane comparison

Membrane Suitable for Sd value Weight Roll
MAXI 140 metal, clay and concrete tile roofs; can be laid on insulation ~0.02 m 140 g/m² 60 or 75 m²
MAXI 140 SK2 the same, with two adhesive strips for the overlaps ~0.02 m 140 g/m² 60 or 75 m²
SUPER 180 SK2 all roofing, with adhesive strips; also suitable for walls as a wind barrier ~0.02 m 180 g/m² 75 m²
ANTICON 130 ventilated metal roofs with a risk of condensation ~40 m 130 g/m² 75 m²
BITUMI 450 fully boarded roofs under bitumen and wooden shingles, slate ~50 m 450 g/m² 30 m²

The lower the Sd value, the better the membrane lets water vapour through. All membranes have the highest watertightness class W1.

With adhesive strips (SK2) or without?

MAXI 140 and MAXI 140 SK2 have the same technical properties. The SK2 version has two integrated self-adhesive strips along the edges: you just press the overlaps firmly together, and the joint is sealed without any extra materials. This speeds up installation, improves wind-tightness and reduces the risk of mistakes. The version without adhesive strips needs a separate installation tape for the overlaps, but the membrane itself is cheaper.

How to lay a roofing membrane

  1. Prepare the structure

    A breather membrane can be laid directly on the insulation or a fully boarded deck, although we recommend leaving a gap of a few centimetres. ANTICON 130 and BITUMI 450 must not be laid directly on the insulation – ANTICON 130 needs a ventilation gap of at least 5 cm.

  2. Lay it horizontally

    The membrane is laid in horizontal strips from the bottom of the roof upwards, so that each upper strip overlaps the one below. Follow the manufacturer’s instructions for the overlap width. SK2 adhesive strips are activated by pressing them firmly together; without SK2, the overlaps are taped with installation tape.

  3. Cover it in time

    The membrane is held down with counter battens, with the battens and roofing on top. The roofing must be installed within 4 weeks of laying the membrane, and the insulation within 12 weeks. Store membranes in a dry place, protected from the sun.

What else you will need

  • Sealing tapes for membrane overlaps and joints to chimneys, windows and walls.
  • Metal roofing – you can order the membrane together with the roofing in one quote.
  • If you choose TP20 with DripStop anti-condensation layer, no separate membrane is needed.

Frequently asked questions

What is the difference between a breather membrane and an anti-condensation underlay?

A breather membrane lets moisture out of the structure (Sd ~0.02 m) and can be laid directly on the insulation. An anti-condensation underlay does not let moisture through but absorbs condensation from the underside of metal roofing – it must have a ventilation gap of at least 5 cm and is not suitable for fully boarded roofs.

Which roofing membrane should I choose for a metal roof?

If the roof is insulated, choose a breather membrane, for example MAXI 140 or MAXI 140 SK2. If it is a ventilated metal roof and the main risk is condensation under the roofing, ANTICON 130 is suitable. TP20 with the DripStop layer does not need a membrane.

Can a breather membrane be laid directly on the insulation?

Yes, the manufacturer allows it – MAXI 140 and SUPER 180 SK2 can be laid directly on the insulation or a fully boarded deck. We still recommend leaving a gap of a few centimetres. The anti-condensation underlay ANTICON 130 must not be laid directly on the insulation.

How long can a roofing membrane be left uncovered?

The roofing must be installed within 4 weeks of laying the membrane. The UV resistance of membranes is limited – in laboratory conditions up to 4 months for breather membranes and BITUMI 450, and up to 2 months for ANTICON 130.

Can a breather membrane be used on walls?

Yes. SUPER 180 SK2 is also suitable as a wind barrier in wall structures.

How much roofing membrane does my roof need?

Membranes come in rolls of 60 or 75 m² (BITUMI 450 – 30 m²). When calculating the quantity, overlaps and offcuts have to be added, so it is easiest to send the roof dimensions to our sales team – we will calculate the membrane together with the other roofing materials.

How much does a roofing membrane cost?

The price depends on the type of membrane and the quantity – ask our sales team for the current price. If you are also buying roofing, we will include the membrane in the same quote, and we can deliver the materials to your site.