Roof safety railings are guardrails at the edge of the roof that protect against falls when working on the roof – during maintenance, clearing snow, installing aerials or solar panels. TOODE offers railings by the Finnish manufacturer ORIMA, 0.6 m and 1.1 m high, for standing seam, Classic, metal tile, trapezoidal and soft roofs, also with a built-in snow guard.
A railing for every type of roofing
All models have a similar structure: vertical posts with diagonal braces and oval steel tubes in 3 m modules. The difference is the fixing – it is chosen according to the roofing, so that the railing holds securely and the roof stays watertight.
| Roofing |
Models |
How it is fixed |
| Standing seam profile and Classic |
SYR, SYRL (0.6 m), SYN, SYNL (1.1 m) |
on the seam with clamp brackets, without drilling the roofing |
| Metal tile profile, corrugated asbestos-free sheets |
SYV, SYVL (0.6 m), SYO, SYOL (1.1 m) |
to the battens through the roofing, with spacers and sealing washers |
| Trapezoidal and other profiled roofing |
SYT, SYTL (0.6 m), SYS, SYSL (1.1 m) |
onto the roofing profile with 10 screws per bracket, the fixing points sealed with sealing tape |
| Soft (bitumen) roofing and metal tiles |
SYP, SYPL (0.6 m) |
posts with a base plate, screwed to the roof |
0.6 m or 1.1 m high
The 1.1 m railing is a full-height guardrail with three horizontal tubes. The 0.6 m railing is lower, with two tubes, and visually less noticeable. The height is chosen according to the building, the roof pitch and the work that will be done on the roof – if in doubt, ask a TOODE consultant.
With a built-in snow guard
Models with the letter L at the end of the code (SYRL, SYNL, SYVL, SYOL, SYTL, SYSL, SYPL) have two extra tubes at the bottom of the railing that act as a snow guard. They hold back snow and ice above entrances, paths and parking spaces, so no separate snow guard is needed there.
Colours and ordering
The railings are made of hot-dip galvanised, powder-coated steel and are available in the colours of the TOODE RR colour chart, other colours to individual order. TOODE supplies the railings; they are installed by a roofer following the manufacturer’s installation instructions (available under the “Documents” tab of each product).
For moving safely on the roof, roof ladders and a roof walkway are also useful, and for working with a safety harness – safety anchors.
Frequently asked questions
Which roof railing suits my roof?
The railing is chosen according to the roofing: models SYR/SYN for the standing seam profile and Classic, SYV/SYO for metal tiles, SYT/SYS for trapezoidal roofing and the universal SYP for soft roofing. The height is 0.6 m or 1.1 m, and each is also available with a snow guard.
Do I need to drill the roof to install a railing?
For standing seam and Classic roofs – no, the brackets are fixed onto the seam. On metal tiles and trapezoidal roofing the brackets are screwed on, and the screw points are sealed with sealing washers or sealing tape so that the roof stays watertight.
How do I order a roof railing?
For a quote, give the roofing type, length, height, colour and whether you need a snow guard.
What colours are the railings available in?
In the colours of the TOODE RR colour chart, the same as metal roofing, and in other colours to individual order.
Does TOODE install the railing?
No, TOODE supplies the railings. They are installed by a roofer following the manufacturer’s installation instructions, which are available on each product page.