Copper sheet in coils and sheets

Copper sheet is a flat copper material in coils and sheets, used to make roof and facade details – window sills, parapets, verges and other bends. TOODE offers 0.6 mm thick copper sheet 1000 mm wide: you can buy the material itself in the length you need, or order finished bends made to your drawing.

Specifications

Parameter Value
Material copper Cu-DHP (CW024A)
Thickness 0,6 mm
Width 1000 mm
Length cut to the length you need, a whole coil can also be bought
Weight 5,34 kg/m²
Reaction to fire A1
External fire performance BROOF
Compliance CE marking, EN 14783

Material or a finished bend

Material in coils and sheets

Useful if you will bend the parts yourself or your sheet metal worker will make them. We cut the length you need, or you can buy a whole coil.

Bends to your drawing

We make custom bends from copper sheet, such as window sills, parapets, verges and cover strips. The parts are made to your dimensions.

How to order a copper bend

For a quote, prepare a drawing with exact dimensions and bend angles and give the quantity you need. No colour code is needed, as copper is not coated. Send the drawing to your TOODE sales contact or visit your nearest TOODE sales point. Read more on the Flashings to your drawing and dimensions page.

How copper changes over time

The copper surface is not coated, so it changes naturally. The bright copper shade becomes browner and darker over time, and over the years a greenish patina can form. This is a natural protective layer, and how quickly it forms depends on the environment. When planning details, keep in mind that a new copper surface will look different after a few years.

What to consider when installing

Copper must not be in direct contact with galvanised steel or aluminium, and water from a copper surface should not run onto such parts, as they will corrode faster. Copper or stainless steel fixings are used.

If your project needs anything else made of copper, tell us what you are looking for – we will help find a solution on individual request.

It is another Latvian word for copper, so in Latvia copper sheet is also called “kapara skārds” or “kapara loksne”. It is the same material.

Copper sheet is 0.6 mm thick and 1000 mm wide. We cut the length you need, or you can buy a whole coil.

Yes. We make window sills and other custom bends from copper sheet to your drawing and dimensions.

No, copper sheet is not coated – it has the natural copper shade. It becomes darker over time, and over the years a greenish patina can form.

No, TOODE supplies copper sheet and bends; installation is done by a roofer or sheet metal worker.

Ask a TOODE consultant what you need – we will help find a solution on individual request.