Motip Roof Paint - Roof paint 400 ml

Motip Roof Paint – Roof spray paint, 400 ml

A spray paint developed specifically for roofs, in an aerosol can, from Motip – a Dutch manufacturer with more than 70 years of experience in making spray paints. Designed for painting and renovating metal roof surfaces, ridge flashings, rainwater systems and other roof elements. The aerosol format lets you cover hard-to-reach places – seams, the inner edges of profiles and small repair areas – quickly and precisely, without a brush or roller. Available in various shades – contact us to find out which colours are available.


Main properties

  • Type: Special roof paint in an aerosol can
  • Packaging: 400 ml aerosol
  • Spraying distance: 25–30 cm from the surface
  • Optimum working temperature: 15–25 °C
  • Manufacturer: Motip Dupli, the Netherlands

Important before use

Do not spray over synthetic (acrylic) paints! If the surface has previously been treated with acrylic or another synthetic paint, Motip Roof Paint will not adhere to it properly. If in doubt, test a small area first.


Instructions for use

The surface must be clean, dry and free of oil and grease. Remove loose old paint and rust, then sand the surface. If needed, apply Motip primer first. Mask off areas you do not want to paint.

Shake the can well for 2 minutes before use and do a test spray on paper first. Spray from 25–30 cm, applying several thin coats. Shake again before each coat. After use, clean the valve – turn the can upside down and press the nozzle for about 5 seconds.


Colour availability – ask us.

Ask about paint availability →
View all paints and sealants →

An aerosol is especially handy where using a brush is awkward – in narrow seams, the inner edges of ridge flashings, gutter bracket fixings and other hard-to-reach places. The fine mist also gets into places a brush cannot reach and gives a more even finish. 400 ml is enough for treating larger repair areas.

Paints with different bases are not always compatible – an alkyd-type paint applied over acrylic may peel or form an uneven surface. If you are not sure what paint was used before, test a small, inconspicuous area before treating the whole surface.

Coverage depends on the porosity of the surface, the shade of the paint and the number of coats. As a guide, a 400 ml can is enough for about 0.8–1.5 m² in several coats. For roof repairs, where small areas are usually treated, one can is generally enough.

No – spray paints should be used in places sheltered from the wind. Wind scatters the spray, reduces coverage and can damage nearby surfaces. Painting in rain or high humidity is not recommended either.