Noise-reducing sealing tape for Classic and standing seam roofs

Noise-reducing sealing tape for Classic and standing seam roofs – 4 mm × 80 mm × 25 m

A closed-cell polyethylene foam sealing tape designed for use under Classic profile and standing seam metal roof sheets. Its main job is to reduce the noise of rain and hail on a metal roof, cushion the sheets against the base and even out irregularities, giving the sheet smoother and firmer support. The tape is fixed with small nails. Available in anthracite grey.


Technical specifications

Property Method Value
Material – Closed-cell polyethylene foam (PE)
Colour – Anthracite
Thickness – 4 mm
Width – 80 mm
Coil length – 25 m
Density ISO 845 ~33 kg/m³
Hardness (Shore 00) – 45–55 Sh
Water absorption ISO 2896 < 1 % vol
Moisture resistance – Very good
Temperature range – −30 °C to +100 °C
Tensile strength (lengthwise) ISO 1926 410 kPa
Tensile strength (crosswise) ISO 1926 280 kPa
Elongation at break (lengthwise) ISO 1926 160 %
Elongation at break (crosswise) ISO 1926 140 %
Compressive strength at 25% deformation ISO 3386-1 43 kPa
Shape recovery 24 h after compression (25%) ISO 1856-C 9.2 % permanent deformation

What does this tape do?

Reduces noise – the foam tape under the sheet acts as a buffer layer that absorbs impacts instead of passing them straight into the roof structure. The result is a noticeably quieter roof, even in heavy rain.

Evens out the surface – irregularities, nail heads and other unevenness in the base are absorbed by the foam layer, so the sheet is supported evenly across its whole width. This improves the look of the sheet and reduces the risk of it buckling near the fixing points.

Installation: The tape is laid on the base or battens and fixed with small nails before the roof sheets are laid.


Contact our specialists about availability and price.

Contact our sales team →
View all sealing tapes →

Foam can have an open-cell or closed-cell structure. Open-cell material absorbs water and moisture – it is not suitable for outdoor or roof use. In a closed-cell structure every bubble is sealed, so water cannot get into the material. That is why this tape has water absorption below 1% – it keeps its properties even in prolonged damp conditions.

Yes – the permanent deformation 24 hours after 25% compression is only 9.2%. This means the tape recovers almost completely to its original shape. This figure matters in the long term – the tape keeps its cushioning and noise-reducing function for years.

That depends on the roof area and the installation pattern – how many rows of tape are laid under each sheet. Contact us – we will help you calculate the amount needed from the dimensions of your roof.