Profile seal - TP20 trapezoidal roofing

Profile seal – for TP20 trapezoidal roofing

A foam profile seal made to fit the trapezoidal (TP20) sheet profile exactly. It is used at the ridge and eaves to seal the gap between the roof sheet and the base – keeping out wind-driven rain, snow, insects and birds. The seal has two layers: the grey outer layer protects against mechanical damage and the weather, while the blue fine-pore inner layer filters the air and lets the roof “breathe”.


Main properties

  • Profile: Trapezoidal TP20 – matches the trapezoidal shape and height of the TP20 sheet
  • Use: Ridge and eaves
  • Material: Two-layer foam – outer protective layer + fine-pore inner filter layer
  • Fixing: Push into the profile or fix with mastic
  • Joining: Sections can be joined in a row to the required length

Use

The seal is fitted at the ridge or eaves under the TP20 trapezoidal sheet before it is finally fixed. It fills the gap formed by the ribbed trapezoidal profile of the sheet and makes sure rain, snow or unwanted animals cannot get in through this gap. The two-layer structure lets the roof ventilate while keeping it sealed against moisture and insects.


Contact our specialists about availability and price.

Contact our sales team →
View all roof accessories →

The seal can simply be pushed in between the sheet and the base – it is held by friction and the weight of the sheet. If firmer fixing is needed or it has to be fitted vertically (for example at the ridge), it can be fixed with mastic. Both methods are easy and need no special tools.

The TP20 seal is lower (20 mm), the TP45 higher (45 mm). Each type is made to fit its sheet profile exactly, so they are not interchangeable. Make sure the seal matches the roofing profile you are using.