The safety anchor for standing seam roofs is a permanent connection point for a personal fall protection system, designed for working safely on metal roofs with a double standing seam.
The anchor is installed on a single standing seam with a special clamp, so no holes need to be drilled in the roofing. This helps keep the standing seam roof watertight and avoids making extra holes in the roofing.
The safety anchor point is designed for both flat and pitched standing seam roofs and is suitable for up to two users. A swivelling attachment loop for connecting the personal fall protection system is included.
The product is made by Rothoblaas and complies with the standards for professional roof safety systems – EN 795:2012 Type A, CEN/TS 16415:2013 and UNI 11578:2015 Type A.
Main advantages
- Installation without drilling the roof – fixed directly to the standing seam.
- Designed for up to 2 users.
- Complies with safety standards EN 795:2012 Type A, CEN/TS 16415:2013 and UNI 11578:2015 Type A.
- Suitable for flat and pitched roofs.
- Swivelling anchor loop included.
- Made of AISI 304 stainless steel.
- Available in stainless steel, anthracite and brown.
Use
The safety anchor is designed as a connection point for a personal fall protection system when carrying out roof maintenance, installation, cleaning or other work at height.
This model is designed for roofs with a 25 mm double standing seam. The anchor is fixed to a single standing seam without drilling the roofing.
Technical drawing and dimensions
The picture shows the main dimensions of the safety anchor. Click on the picture to enlarge it.
| L – length | 400 mm |
| B – width | 163 mm |
| H – height | 130 mm |
| Seam height | 25 mm |
Technical specifications
| Product type | Safety anchor for standing seam roofs |
| Manufacturer | Rothoblaas |
| Product code | SIANK |
| Material | AISI 304 / 1.4301 stainless steel |
| Seam height | 25 mm |
| Dimensions | 400 × 163 × 130 mm |
| Maximum number of users | 2 persons |
| Included | Swivelling anchor loop |
| Available colours | Stainless steel, anthracite, brown |
| Compliance | EN 795:2012 Type A, CEN/TS 16415:2013, UNI 11578:2015 Type A |
Minimum roof sheet thickness
The manufacturer’s technical documentation gives the minimum roof sheet thicknesses depending on the material.
| Steel (Fe) | 0,5 mm |
| Aluminium (Al) | 0,7 mm |
| Copper (Cu) | 0,5 mm |
| Titanium zinc sheet (Zn-Ti) | 0,7 mm |
| Stainless steel | 0,4 mm |
Before installation, the suitability of the specific roofing and supporting structure must be assessed according to the project and the manufacturer’s requirements.
Safety and compliance with standards
For roof safety products, not only the design matters, but also verifiable compliance with the relevant safety standards.
This anchor has been tested and is designed for a professional fall protection system. The manufacturer declares compliance with:
- EN 795:2012 Type A – individual anchor point for fall protection systems;
- CEN/TS 16415:2013 – requirements for anchor devices used by several users at the same time;
- UNI 11578:2015 Type A.
An official declaration of conformity and installation/safety documentation from Rothoblaas are also available for the product.
Available colours
The safety anchor is available in several finishes so that it can be matched visually to the roofing – ask a consultant about availability.
Need a safety anchor for your standing seam roof?
Contact TOODE specialists – we will help you assess the most suitable roof safety solution and prepare a quote for your project.
See other roof safety solutions too
TOODE offers safety anchor points, cable fixings and other solutions for working safely on the roof and reducing the risk of falls.








