Square rainwater system
The square rainwater system collects and drains rainwater from the roof efficiently, protecting the facade and foundations of the building from moisture. The system consists of gutters, pipes, brackets and connecting components that together form a complete and reliable drainage solution.
Square rainwater system gutter size: 125 mm.
All components are available in the colours: Galvanised, RR11, RR20, RR21, RR22, RR23, RR29, RR32, RR33, RR37, RR40, RR41 and RR750.
Material used – SSAB Pural BT coated on both sides. Material thickness: 0.55 – 0.60 mm.
Square rainwater system installation video
The video shows the installation of the square rainwater system and the correct order for installing the main components.
System components
Click on an image to enlarge it!
1. Square gutter

The square gutter collects rainwater from the roofing. Gutter size: 125 mm.
2. Square gutter bracket 140 mm

The gutter bracket with a 140 mm projection is for fixing the gutter to the roof structure or fascia.
3. Square gutter bracket 300 mm

The gutter bracket with a 300 mm projection is for cases where a greater distance between the gutter and the fixing point is needed.
The picture shows one way of fixing the bracket to the roof structure. The bracket can also be twisted and fixed to the side of a rafter.
In this case it is best to paint the bracket after bending. To avoid damaging the paint coating during bending, it is best to warm the metal bracket slightly before bending.
4. Internal gutter bracket

The internal gutter bracket fixes the square gutter from the inside. The angle and distance of this bracket can be adjusted.
5. Gutter bracket extension 45°

The 45° extension lets you adjust the position of the gutter bracket on the roof structure.
6. Gutter bracket extension 90°

The 90° extension is for installing the gutter bracket where the bracket angle needs to be changed.
7. Gutter bracket extension 120°

The 120° extension lets you adjust the gutter bracket angle on more complex roof structures.
8. Square gutter external corner

The external corner is for the external corners of a building. Standard angle: 90° ; other angles are available to individual order.
9. Square gutter internal corner

The internal corner is for the internal corners of a building. Standard angle: 90° ; other angles are available to individual order.
10. Square gutter end cap

The end cap closes the gutter and stops water running out at the end. It is best fixed with silicone or seam gel.
Please note! The square gutter has different left and right end caps!
11. Square outlet

The outlet connects the gutter to the downpipe and leads water from the gutter into the pipe.
12. Bend A

The short bend A changes the direction of the pipe at the outlet or the wall.
13. Bend B

The long bend B leads the pipe along the facade or around parts of the building structure.
14. Pipe with shoe

A pipe with an integrated shoe leads water away from the foundations of the building. Length – 2.5 metres.
15. Square downpipe

The square downpipe leads rainwater from the gutter down to ground level. Length – 2 metres.
16. Square pipe brackets

Two-part pipe bracket with double-ended screws and wall plugs for securely fixing the downpipe to the facade.
Double-ended screw lengths:
- 100 mm
- 150 mm
- 200 mm
17. Bend C

Bend C is used in more complex installations where an extra change of pipe direction is needed, or as an alternative to the shoe if water needs to be led in a different direction.
18. Gutter guard mesh

The guard mesh stops leaves and other debris getting into the rainwater system.
19. Outlet leaf catcher

The leaf catcher is placed in the outlet to stop leaves and debris getting into the downpipe.
20. Gutter corner guard

The gutter corner guard helps prevent water overflowing at the gutter corners in heavy rain.
21. “Karro” facade bracket for downpipes

The “Karro” facade brackets are an alternative to the double-ended screw (component 16). They connect the two-part downpipe bracket to the facade.
22. Angle adapters for external gutter brackets

Angle adapters for external gutter brackets let you adjust the angle of the gutter when the structure it is fixed to is not at the angle you want. Available in 15 and 20 degrees.
Need help choosing a square rainwater system?
Interested in the round rainwater system too?




