VELUX installation products – for a roof window that lasts
A roof window is only as good as its installation. VELUX installation products are designed as one system with the window: the flashing leads water off the roof surface, while the underfelt collar, insulation frame and vapour barrier protect the roof structure from moisture and heat loss.
What the installation consists of
- Flashing – made precisely for each window size. It connects the window to the roofing and leads water around the window. The flashing is chosen according to the roofing.
- BFX underfelt collar – connects the window to the roof underlay. It has an adjustable drainage gutter that leads water away from the window.
- BDX insulation frame – fills the gap between the window and the roof structure, reduces heat loss and prevents cold bridges. The flexible frame can be compressed, so it is quick to install.
- BBX vapour barrier – stops warm, humid indoor air getting into the roof structure, where it could condense.
- Lining – a ready-made interior lining for the window opening, made of durable PVC.
A flashing for your roof
For profiled roofing, such as corrugated tiles and profiled metal sheets, the EDW flashing is used (profile height up to 120 mm, roof pitch 15-90°). For flat roofing there is the EDZ flashing. If several windows are installed side by side or one above the other, combination flashings are used, and the window can also be recessed – installed lower in the roof plane.
For a metal roof, the consultant will choose the flashing according to the specific profile, including the roof profiles made by TOODE. We order the installation products together with the window so that everything matches the size and the roofing.









