Acrylic touch-up paint for metal roofs

Acrylic touch-up paint for metal roofs – 24 ml

Acrylic-based touch-up paint for repairing scratches and mechanical damage on metal roof sheets. Suitable for surfaces previously painted with alkyd or acrylic paints, as well as factory-coated steel sheets with PVC, Pural, polyester, acrylic and PVDF coatings – the widest range of compatible coatings among repair paints. Water-based, quick-drying, no solvents needed. Packaging: 24 ml bottle with brush.


Technical data

Property Value
Base Acrylic (water-based)
Packaging 24 ml bottle with brush
Thinner Water
Surface dry (23 °C, 50% relative humidity) 1–3 hours
Recoating After 24 hours
Min. working temperature +5 °C (air, surface and paint)
Max. relative humidity during painting 80%
Storage Protect from frost

Compatible coatings

The touch-up paint is compatible with the widest range of factory roof coatings:

  • Factory-coated steel sheets – Polyester, Pural, PVDF, PVC, Acrylic
  • Surfaces previously painted with alkyd paints
  • Surfaces previously painted with acrylic paints

This means the paint suits both new metal roofs (sheets from the manufacturer) and older roofs that have previously been repainted with an alkyd or acrylic topcoat.


Available in various shades to match your roof colour – contact us to find out which are available.

Ask about paint availability →
View all paints and sealants →


Instructions for use

Shake well before use. The surface being repaired must be clean, dry and free of oil and dust. The air, surface and paint temperature must be above +5 °C, and the relative humidity below 80 % both during painting and while drying. The surface dries in 1–3 hours. Wait 24 hours for full curing and before any recoating.

Tools can be washed with water after use. Store the paint somewhere warm – protect it from frost, as water-based paint that has frozen loses its properties.

Both products are repair paints for metal roofs, but with some differences. This touch-up paint comes in a larger pack (24 ml compared with 12 ml) and is also compatible with alkyd-painted surfaces – so it also suits older roofs that have been repainted with alkyd. Sunchem Touch Up Paint offers a wider range of standard colours from the RAL and NCS charts. Both paints are water-based and quick-drying.

Water-based paints dry as the water evaporates from the paint layer. If the humidity is too high (above 80%), the water cannot evaporate fast enough – the paint dries unevenly or incompletely, and the finished surface may be dull or poorly bonded. Fog and dew on the surface are also good reasons to postpone painting.

Yes – if the first coat does not fully cover the damage, a second coat can be applied after 24 hours of drying. Applying several coats gives a better colour match and more durable protection at the repaired spot.