Bitumen sealing spray - AIR BITUM

HOLZ Technic AIR BITUM – Bitumen sealing spray, 500 ml

HOLZ Technic AIR BITUM is a ready-to-use solvent-based bitumen sealing spray for sealing roofs, downpipes, pipework and other surfaces and protecting them against moisture. The special elastomer-modified bitumen formula stays flexible once dry and is resistant to the weather and salt corrosion. The spray suits most substrates and shapes, including hard-to-reach places where a brush or spatula is not practical.


Main properties

  • Base: elastomer-modified bitumen (solvent-based)
  • Colour: black
  • Packaging: 500 ml aerosol
  • Coverage: approx. 4 m² per can
  • Drying time: 1-2 h (23 °C / 50% relative humidity)
  • Temperature resistance once dry: −10 °C to +60 °C
  • Application temperature: +5 °C to +35 °C (can, substrate and surroundings)
  • Transport temperature: +5 °C to +35 °C
  • Storage temperature: +5 °C to +30 °C
  • VOC: 46% / 460 g/l
  • Manufacturer: HOLZ Technic, Italy

Use

AIR BITUM is used to seal small leaks and holes in roofs, downpipes and pipe joints, to protect the underground parts of timber posts against moisture, and to help seal concrete surfaces and fill small imperfections. Before application the surface must be clean, dry and free of dust, loose paint, rust and other loose material. Shake the can well before use until you can feel the steel ball moving inside, and spray in short bursts to get and keep an even spray pattern. After use, turn the can upside down and press the nozzle for 1-2 seconds so it does not clog.

Important before use

  • Application temperature for the can, substrate and surroundings: +5 °C to +35 °C
  • Do not use in unventilated areas
  • Flammable product – keep away from open flames and heat sources
  • Avoid breathing in the vapour/spray and contact with eyes and skin
  • Pressurised container – protect from sunlight, do not expose to temperatures above +50 °C, do not pierce or burn, even after use

Contact our specialists about availability and price.

Contact our sales team →
View all sealants and paints →

Under standard conditions (23 °C, 50% relative humidity) the drying time is 1-2 hours. The actual time varies depending on the thickness of the coat, the type of surface and the ambient conditions.

Once dry, the coating withstands temperatures from −10 °C to +60 °C.

The application temperature for the can, substrate and surroundings is +5 °C to +35 °C.

One 500 ml can covers approximately 4 m², depending on the thickness of the coat.

The surface must be clean, dry and free of dust, loose paint, rust and other loose material.

Yes, it is flammable and contains solvent – use it in well-ventilated areas, away from open flames and heat sources.