Toode by Eurovent MAXI 140 is a three-layer high-vapour-permeability roofing membrane for pitched roof structures, used as the initial waterproofing and wind protection layer under the final roofing.
The product is distributed under the Toode by Eurovent label, giving authorised supply to the Latvian market.
This version is without integrated adhesive strips.
Structure and how it works
The membrane consists of two polypropylene non-woven layers with a functional breathable layer between them.
It gives:
- high vapour permeability (Sd approx. 0.02 m)
- full watertightness (class W1)
- protection against wind and moisture
- mechanical strength during installation
The membrane can be laid directly on the insulation without a ventilation gap.
Technical specifications
- Weight: approx. 140 g/m²
- Vapour permeability: approx. 3000 g/m² / 24h
- Sd value: approx. 0.02 m
- Watertightness: class W1
- Tensile strength (MD): ≥270 N / 50 mm
- Tensile strength (CD): ≥210 N / 50 mm
- Temperature resistance: from -40 °C to +100 °C (briefly up to +120 °C)
- UV stabilisation: up to 4 months (laboratory conditions)
Technical parameters according to the manufacturer’s documentation.
Available roll sizes
The membrane is available in two roll sizes:
- 60 m² (1,5 × 40 m)
- 75 m² (1,5 × 50 m)
The different roll sizes let you choose the best option for the needs of the project and reduce offcuts.
Use
- For ventilated and fully boarded pitched roofs
- For laying directly on insulation
- Under metal roofs, clay and concrete tiles
- For new buildings and renovation projects
To seal the joints at the overlaps, a suitable installation tape is recommended.
Storage and installation
- The roofing should be installed within 4 weeks of laying the membrane
- Insulation must be installed within 12 weeks
- Store in a dry place protected from UV radiation
- Transport in a covered vehicle
The warranty is valid when the installation and storage requirements are followed.
MAXI 140 or MAXI 140 SK2 – which to choose?
Both Toode by Eurovent MAXI 140 and MAXI 140 SK2 are three-layer high-vapour-permeability membranes with identical technical parameters (140 g/m², Sd ~0.02 m, class W1).
The main difference:
- MAXI 140 – without integrated adhesive strips. A separate installation tape is needed to join the overlaps.
- MAXI 140 SK2 – with two integrated self-adhesive strips, giving a faster and better sealed joint without extra materials.
If the priority is:
- lower material cost → MAXI 140
- faster installation and maximum airtightness → MAXI 140 SK2
Both versions are available in 60 m² and 75 m² rolls.




