Profile seal - TP45 trapezoidal roofing, eaves

Profile seal – for TP45 trapezoidal roofing, eaves

A foam profile seal made to fit the trapezoidal (TP45) sheet profile exactly – designed for use at the eaves. It seals the gap between the roof sheet and the bottom batten or fascia board, keeping wind-driven rain, snow, insects and birds from getting under the roofing from below. The seal has two layers: the grey outer layer protects against mechanical damage and the weather, while the blue fine-pore inner layer filters the air and lets the roof “breathe”.


Main properties

  • Profile: Trapezoidal TP45 – matches the rib shape and height of the TP45 sheet
  • Use: Eaves – bottom edge of the sheet
  • Material: Two-layer foam – outer protective layer + fine-pore inner filter layer
  • Fixing: Push into the profile or fix with mastic
  • Joining: Sections can be joined in a row to the required length

Use

The seal is fitted at the bottom edge of the TP45 sheet – at the eaves – before the sheet is finally fixed. It fills the gap between the sheet profile and the bottom batten or fascia board, through which wind-driven rain or snow could get into the roof structure from below. The two-layer structure lets the roof ventilate while keeping it protected against moisture and insects.

Note: The ridge and eaves seals for the TP45 profile are different – make sure you choose the right version. The ridge seal is available separately.


Contact our specialists about availability and price.

Contact our sales team →
View all roof accessories →

Yes – by filling the gap at the eaves, the seal also reduces the noise caused by wind blowing under the edge of the sheet. This is an extra benefit that is especially appreciated where the roof is in a windy location.

Sections can be joined in a row, so the quantity needed matches the total length of the roof eaves. Contact us – we will help you calculate the amount needed from the dimensions of your roof.