Roofing screws 6.5 x 38 mm

ETANCO self-drilling screws for snow guards, roof walkways and ladders – 6.5 × 38 mm, GT A, 12 Dura Zinc, painted

ETANCO GT A 6.5 × 38 mm are large self-drilling screws with a hex head and a steel washer with EPDM seal, designed for fixing profiled metal roof sheets to a timber substructure. Toode supplies these screws as the standard fixing for installing snow guards, roof walkways and roof ladders. The screws are available in many RAL colours to match the shade of your roofing. Packed 100 pcs, but can be bought in any quantity.


Main properties

  • Size: 6.5 × 38 mm
  • Head type: Hex head, 3/8″
  • Washer: Steel washer with EPDM seal (Z16)
  • Material: Hardened steel, zinc plated – 12 Dura Zinc (min. 12 µm)
  • Colour: Available in many RAL colours
  • Penetration depth in timber: 30 mm
  • Max. steel thickness: 2 × 1.5 mm
  • Packaging: 100 pcs – smaller quantities also available as needed
  • Manufacturer: ETANCO, Poland

Use

The screws are designed for fixing profiled metal roof sheets and mounting brackets to timber battens. The large diameter (6.5 mm) and hex head give high pull-out resistance, which is essential for structures under higher loads – snow guard systems, roof walkways and roof ladders.

The EPDM seal gives a watertight joint that prevents moisture getting in through the screw hole in the long term. The screws are self-drilling – no pre-drilling needed. Recommended tool: a cordless screwdriver with a 3/8″ hex bit.


The screws are available in many RAL colours – to match the shade of your roofing!

Contact our specialists about available colours and quantities.

Contact our sales team →
View all roofing screws and rivets →


Snow guards, roof walkways and roof ladders are subject to considerable mechanical loads – especially in winter, when snow builds up on them. The 6.5 mm diameter gives much higher pull-out resistance than standard screws (4.8 mm), making the joint safer and longer lasting.

GT A 6.5 × 38 mm screws are available in a wide range of RAL colours to match the shade of your roofing exactly. Contact our sales team about available colours.

Yes – we sell the screws in any quantity. You do not have to buy a full pack. If you need to work out the exact quantity for snow guards or other items, contact our sales team.

Snow guard and roof walkway brackets are often screwed directly through the roof sheet, which means the screw hole can become an entry point for moisture. The EPDM seal under the steel washer seals this point and prevents leaks.

No – GT A are self-drilling screws. They drill through the profiled sheet and into the timber battens without pre-drilling. We recommend a sufficiently powerful cordless screwdriver with a 3/8″ hex bit.