Roof ladder for standing seam roofs
Classic house, Standing seam profile, RR23 Dark grey See how it looks on a house Roof ladder in the roof visualiser - choose the colour, rainwater system and accessories.

Roof ladders give safe access to the roof for maintenance, chimney sweeping and other technical work. This solution is designed for installation on standing seam metal roofs.

Roof ladders are available in 1200 × 450 mm and 3000 × 450 mm sizes. If a longer length is needed, several ladder sections can be joined together.

The ladder system components are available in the colours of the TOODE RR catalogue, and in other colours to individual order.


Roof ladder installation video

The video shows how a roof ladder is installed and the correct order for installing the main components.


Ladder system


Roof and wall ladder system

The picture shows a complete roof and wall ladder system with all its components. (Click on the picture to enlarge it!)

  • 1 – Roof ladder (1200 × 450 mm or 3000 × 450 mm)
  • 2 – Upper ladder hoop
  • 3 – Ladder wall bracket
  • 4 – Ladder wall/hoop T connector
  • 5a – Ladder hoop bracket L
  • 5b – Ladder hoop bracket U
  • 6 – Ladder eaves bracket
  • 7 – Lower ladder hoop
  • 8 – Wall ladder bracket support plate
  • 9 – Ladder guard
  • 10 – Ladder roof bracket
  • 11 – Ladder ridge bracket
  • 12 – Ladder wall bracket clamp

Installing a roof ladder on a standing seam roof

1. Work out the ladder length you need

To choose the right roof ladder length, measure the distance from the ridge to the eaves and subtract about 400 mm.

Then choose the most suitable standard ladder frame length. If a longer length is needed, several ladder frames can be joined with M8 screws.


2. Install the standing seam roof ladder brackets

Standing seam roof ladder bracket

For standing seam roofs, special roof ladder brackets are used that are designed to be fixed to the standing seam.

The brackets give a stable connection between the ladder and the roof without drilling the roofing.

The maximum distance between roof ladder brackets is 1400 mm.


3. Fix the bracket to the standing seam

Standing seam roof ladder bracket counter plate

The roof ladder bracket is fixed to the standing seam with a special counter plate. The counter plate is placed on the other side of the seam and tightened against the bracket.

Standing seam roof ladder bracket on the roof

The counter plate is tightened against the bracket with M8 × 25 screws and nuts, giving a firm connection to the standing seam.


4. Adjust the bracket to the ladder frame

Adjusting the standing seam roof ladder bracket to the ladder frame

During installation, part of the bracket is bent around the ladder frame so that it fits the shape of the frame and gives a stable mechanical connection.

The bracket is installed from the outside of the ladder frame, and the bracket loop is wrapped around the ladder frame.


5. Fix the roof ladder in place

Once all the brackets are installed, the roof ladder is finally fixed to the standing seams.

The top and bottom pairs of brackets must be tightened especially firmly to give a stable ladder structure.

The recommended tightening torque for the bracket screws is about 35 Nm.

Roof ladder on a standing seam roof


Accessories for roof ladders

The roof ladder system can be extended with components that make it easier to move and work on the roof.

Roof ladder step for low-pitched roofs

Roof ladder step for low-pitched roofs

The roof ladder step is installed on the roof ladder and gives a stable footing on low-pitched roofs.

Roof ladder steps on a low-pitched roof

Roof ladder platform

Roof ladder platform

The roof ladder platform gives a stable area for climbing safely onto or off the roof.

Roof ladder platform on a building roof


Other roof ladder solutions

Depending on the type of roofing, TOODE also offers other roof ladder fixing solutions.


Roof ladders for the tile profile and trapezoidal profile →

Roof ladders for the Classic profile →

See all roof ladder solutions:

All roof ladders →

If you need a complete access system from the ground to the roof, see our wall ladder solutions too.

Wall ladders →

Need help choosing a roof ladder?

Contact our sales team →

For a standing seam roof, special roof ladder brackets are used that are fixed to the standing seam with a counter plate.

No. The roof ladder bracket is fixed to the standing seam with a counter plate, so no fixing holes are needed in the roofing.

The maximum distance between roof ladder brackets is 1400 mm.

The counter plate is placed on the other side of the standing seam and tightened against the roof ladder bracket with M8 × 25 screws and nuts.

The recommended tightening torque for the standing seam roof ladder bracket screws is about 35 Nm.

Roof ladder frames are available in 1200 × 450 mm and 3000 × 450 mm sizes. If a longer length is needed, several ladder sections can be joined.