Roof walkways for Classic roofing
Roof walkways for Classic roofing let you move safely during maintenance and chimney sweeping. This system lets you install a roof walkway without screwing through the roofing.
Roof walkways and their components are available in the colours of the Toode RR catalogue, and in other colours to individual order. Available lengths: 3000 mm and 1200 mm.
A 3000 mm roof walkway needs 4 brackets, and a 1200 mm walkway 2 brackets. Using the right number of brackets spreads the load evenly and lets you move safely.
Roof walkway installation video
The video shows how a roof walkway is installed on metal roofs.
1. Roof bracket for the Classic profile

Installation starts with the roof bracket, which is placed at the joint (seam) of the Classic profile.
2. Bracket clamp (counter plate)

The bracket clamp, or counter plate, is placed on the other side and, together with the base bracket, wraps around the profile seam.
3. M8 x 30 mm screws

The two parts are joined with M8 x 30 mm screws. The same screws tighten the bracket onto the profile joint.
4. Bracket on the profile seam

The bracket is tightened onto the profile joint. This way the roofing is not drilled or screwed through, and it stays watertight.
5. Roof walkway bracket

A roof walkway bracket is used, which is joined to the assembled structure with M8 x 30 mm screws.
6. Finished roof walkway structure

The roof walkway bracket is fixed at the angle you want, and then the roof walkway is attached to the structure with M8 x 30 mm screws.
Because it is fixed to the profile seam, the installation is secure and does not damage the roofing, keeping the roof watertight.
Need help choosing a roof walkway for a Classic roof?
See roof walkways for other types of roof:


