Roof walkways for asbestos-free Eternit slate roofs
Roof walkways let you move safely on the roof during maintenance, chimney sweeping and technical inspections. For asbestos-free Eternit slate roofs, a special bracket system is used for a secure and sealed installation.
Roof walkways and their components are available in the colours of the Toode RR catalogue, and in other colours to individual order. Available lengths: 3000 mm and 1200 mm.
Roof walkway installation video
The video shows how a roof walkway is installed on metal roofs.
1. Bracket for asbestos-free Eternit slate roofs

Installation starts with the special bracket for asbestos-free Eternit slate roofs. The end of the bracket is placed under the roof sheet and screwed to the roof structure. The part of the bracket on top of the sheet is screwed through the sheet.
2. 6.5 x 50 mm screws and seals

The bracket is fixed to the roof structure with 6.5 x 50 mm screws. Where the bracket is screwed through the sheet, a seal must be placed between the bracket and the roof to give a tight joint.
3. Roof walkway bracket

The roof walkway bracket is joined to the base bracket, forming a stable support.
4. M8 x 30 mm connecting screws

The roof walkway bracket is joined to the base bracket with M8 x 30 mm screws. The same screws are later used to fix the roof walkway itself.
5. Finished roof walkway bracket on an Eternit roof

Once the bracket structure is ready, the roof walkway is screwed to it. A 3000 mm walkway needs 4 brackets, and a 1200 mm walkway 2 brackets. Using the right number of brackets spreads the load evenly and lets you move safely on the roof.
Need help choosing a roof walkway for an asbestos-free Eternit slate roof?
See roof walkways for other types of roof:






