Roofing screws 4.8 x 70 mm

ETANCO screws for fixing roof sheets to timber – 4.8 × 70 mm, GT F2, 12 Dura Zinc

ETANCO GT F2 4.8 × 70 mm are self-drilling roofing screws with a hex head, steel washer and EPDM seal, designed for fixing profiled metal roof sheets to a load-bearing timber structure. The 70 mm length gives sufficient penetration into the timber battens or rafter while drilling through the metal sheet. The screws are not painted – natural zinc finish (12 Dura Zinc). Packed 100 pcs, but the screws can be bought in any quantity. The screws are available to order – please contact our sales team.


Main properties

  • Size: 4.8 × 70 mm
  • Type: GT F2 – self-drilling, no pre-drilling needed
  • Head type: Hex head with steel washer and EPDM seal
  • Material: Hardened steel, zinc plated – 12 Dura Zinc (min. 12 µm)
  • Finish: Natural zinc – unpainted
  • Corrosion class: C1–C3
  • Standard: ETA-12/0580
  • Packaging: 100 pcs – smaller quantities also available as needed
  • Availability: To order
  • Manufacturer: ETANCO, Poland

Use

The screws are designed for fixing profiled metal roof sheets to timber battens or load-bearing beams. The 70 mm length is needed when the sheet is fixed through a layer of insulation or when the profile depth calls for a longer screw to get a firm grip in the timber. The steel washer with EPDM seal seals the fixing point against moisture.

The screws are self-drilling – no pre-drilling needed. Recommended tool: a cordless screwdriver with a hex bit.


These screws are available to order – contact our specialists!

We will confirm availability and delivery time.

Contact our sales team →
View all roofing screws and rivets →


The 70 mm length is needed when the screw has to drill through the metal sheet and go deep enough into the timber battens or rafter – for example when there is a layer of insulation under the sheet or the sheet profile is deep. Standard 28–38 mm screws would not give a sufficient grip in the timber in such cases.

Both screws are from the GT F2 range with the same hex head and EPDM seal. The difference is the length – 28 mm is for fixing standard roof sheets, while 70 mm is needed when there is an additional layer between the sheet and the timber structure or deeper penetration is required.

This size is supplied in a natural zinc finish, unpainted. If you need a painted version, please contact our sales team – we will look into the options.

Yes – we sell the screws in any quantity. As they are available to order, we recommend contacting our sales team in good time to confirm the quantity and delivery time.

No – GT F2 are self-drilling screws. A cordless screwdriver with a hex bit is enough. Given the 70 mm length, a sufficiently powerful screwdriver is recommended.