M8 bolt for joining parts

M8 × 30 hex bolt and M8 nut – for joining snow guards, roof ladders and roof walkways

The M8 × 30 mm hex bolt (DIN 933, grade 8.8) and M8 hex nut (DIN 934) are the standard fixing set we use for joining snow guard, roof ladder and roof walkway parts to each other. The bolt and nut are fully zinc plated – long-lasting protection against corrosion outdoors. Both items are available in any quantity.

Note: An M8 × 45 mm bolt is used for joining several roof ladder sections.


Bolt – M8 × 30 mm

  • Size: M8 × 30 mm
  • Type: Fully threaded hex bolt
  • Standard: DIN 933
  • Strength grade: 8.8
  • Coating: Zinc plated (ZP)
  • Spanner size: SW 13 mm
  • Packaging: 200 pcs – smaller quantities also available

Nut – M8

  • Size: M8
  • Type: Hex nut
  • Standard: DIN 934
  • Coating: Zinc plated
  • Spanner size: SW 13 mm
  • Packaging: 200 pcs – smaller quantities also available

Use

The M8 × 30 mm bolt and M8 nut are designed for joining snow guard and roof walkway brackets and rails to each other. Strength grade 8.8 gives sufficient strength for the mechanical loads on these structures – especially in winter, when snow builds up on them.


Need help choosing fixings?

Contact our specialists or browse our full range of roofing screws.

Contact our sales team →
View all roofing screws and rivets →


Strength grade 8.8 is the standard for medium-high strength bolts – minimum tensile strength 800 N/mm² and minimum yield strength 640 N/mm². This is sufficient for snow guard, roof walkway and ladder joints exposed to mechanical and weather loads.

DIN 933 is a fully threaded bolt without self-locking – it must always be tightened with a nut.

Yes – we sell both items separately and in any quantity.