Roofing screws 4.8 x 28 mm flat TORX

ETANCO roofing screws – 4.8 × 28 mm, GTF P, 20 Dura Zinc, painted

ETANCO GTF P 4.8 × 28 mm are self-drilling roofing screws with a round head, TORX drive and an integrated round rubber seal, designed for fixing metal roof sheets. The seal gives a watertight joint at the fixing point. The screws are painted and available in many RAL colours, so the joint matches your roofing. The 20 Dura Zinc plating (min. 20 µm) gives better corrosion resistance than standard 12 µm plating. Packed 250 pcs, but the screws can be bought in any quantity – you do not have to buy a full pack.


Main properties

  • Size: 4.8 × 28 mm
  • Type: GTF P – self-drilling, no pre-drilling needed
  • Head type: Round head with integrated rubber seal
  • Drive: TORX
  • Material: Hardened steel, zinc plated – 20 Dura Zinc (min. 20 µm)
  • Colour: Available in many RAL colours
  • Standard: ETA-12/0580
  • Packaging: 250 pcs – smaller quantities also available as needed
  • Manufacturer: ETANCO, Poland

Use

The screws are designed for fixing metal roof sheets. The round head with rubber seal sits tightly on the sheet surface and gives a watertight joint at the screw – especially important on painted roofing, where the screw needs to blend in with the roof colour.

The screws are self-drilling – no pre-drilling needed. Recommended tool: a cordless screwdriver with a TORX bit.


The screws are available in many RAL colours – to match the shade of your roofing!

Contact our specialists about available colours and quantities.

Contact our sales team →
View all roofing screws and rivets →


ETANCO GTF P screws are available in a wide range of RAL colours to match the shade of your roofing exactly. Contact our sales team about available colours – we will help you find the right match.

Yes – we sell the screws in any quantity. You do not have to buy a full pack. If you need a small quantity for repairs or additions, just tell us how many pieces you want.

GTF P is a screw with a round head and rubber seal – it sits directly on the sheet surface. GT F2 has a larger aluminium washer with an EPDM seal, which gives a wider contact area and a tighter seal. The GTF P head and seal are more compact and less visible.

20 Dura Zinc means the screw is zinc plated with a layer at least 20 µm thick. This is thicker than the standard 12 µm plating and gives better protection against corrosion before the paint is applied on top.

No – GTF P are self-drilling screws that drill and tap at the same time. A cordless screwdriver with a TORX bit is enough.

Tighten the screw so that the head sits tightly on the sheet surface, but the sheet is not compressed or deformed. We recommend setting the screwdriver to a medium torque and checking the first screw visually.