Snow guards for trapezoidal and universal roofs – installation, brackets and correct fitting
Snow guards are an essential safety element for trapezoidal and other metal roofing – they prevent snow and ice from sliding off the roof uncontrollably.
A correctly installed snow guard system protects people, vehicles, property and the roof structure from damage, and helps spread the snow load evenly over the roof.
For trapezoidal roofs, a universal bracket is used, screwed to the load-bearing part of the roof sheet – the inner wave of the trapezoidal profile.
This type of bracket fixes the snow guard securely and durably, while keeping the roofing mechanically stable.
Snow guards and their components are available in the colours of the Toode RR catalogue, and in other colours to individual order.
Snow guard installation video
The video shows how the snow guard brackets and tubes are installed on metal roofs.
Snow guard bracket system for trapezoidal roofs
The snow guard system for trapezoidal roofs consists of simple but strong components that allow quick installation and safe use.
The universal bracket is suitable not only for trapezoidal profiles, but also for other roofing with a similar structure.
1. Universal snow guard bracket
The universal bracket is the main component for installing a snow guard on a trapezoidal roof.
It is placed on the bottom of the trapezoidal profile wave, which gives the greatest mechanical stability and transfers the load to the roof structure.
The bracket design holds the snow guard securely and gives a long service life even under higher snow loads.

2. Special seals for snow guard brackets
For extra protection, special seals for snow guard brackets can be used.
The seals prevent direct contact between the metal bracket and the roofing, protecting the roof from scratches and coating damage.
They also give a tighter and more stable fixing point where the screws go in.
The seals are specially designed for this purpose and are placed in the bracket holes as needed.

3. Snow guard fixing screws 6.5 x 38 mm
The universal bracket is fixed to the roof with 6.5 x 38 mm snow guard screws.
These screws are designed for secure fixing in metal roofing and give a stable connection to the roof structure.
The screws have a sealing washer that gives a sealed joint and protects the roof from moisture getting in at the fixing point.
The high-quality material resists corrosion and lasts a long time in all weather.

4. Bracket extension for an extra snow guard (if needed)
The bracket extension lets you install an extra row of snow guards, making the system more effective and safer.
This is especially important for steeper roofs or areas with higher snow loads.
The extension makes it possible to place snow guards at different heights, spreading the snow mass more effectively and reducing the load on individual fixing points.
This solution is also especially recommended when solar panels are installed on the roof. Because of the thickness of the solar panels, the snow guards must be installed higher.
With the extension, the lower snow guard can be fixed in the upper bracket hole, even without installing a third snow guard. This allows the snow load to be controlled more effectively and gives extra safety without a more complex installation.
The result is a flexible, adaptable system that suits modern roofs.

5. Finished snow guard bracket on a trapezoidal roof
Once the universal bracket has been installed and screwed to the roof structure, it is ready for the snow guard tubes.
The holes in the bracket let the snow guard tubes be inserted easily and securely, creating a complete snow retention system.
We recommend 4 brackets per snow guard section (3000 mm) to spread the load evenly.
When joining two snow guard sections (6000 mm), at least 7 brackets are recommended to keep the system stable and safe.
A correctly installed system controls the snow mass effectively and reduces the risk of snow sliding off.
Need help choosing snow guards for a trapezoidal roof?
See snow guards for other types of roof:




