Timber screws for external gutter brackets

KLIMAS timber construction screws – 5 × 50 mm, KMWHT/WKCS-D, TX25, ceramic coating

KLIMAS KMWHT/WKCS-D 5 × 50 mm are high-quality timber construction screws with a countersunk head, TORX25 drive and ceramic coating, designed for joining load-bearing timber elements. The double thread and specially shaped milling point allow quick and easy driving without pre-drilling. We recommend these screws as the ideal solution for fixing external gutter brackets. Packed 300 pcs, but the screws can be bought in any quantity – you do not have to buy a full pack.


Main properties

  • Size: 5 × 50 mm
  • Head type: Countersunk head (sits flush with the timber surface)
  • Drive: TORX25 (TX25)
  • Coating: Ceramic coating – long-lasting corrosion protection for outdoor use
  • Thread: Double thread with serrations – fast driving, less resistance
  • Point: Milling point – no pre-drilling needed
  • Standard: ETA-18/0817
  • Packaging: 300 pcs – smaller quantities also available as needed
  • Manufacturer: KLIMAS Wkręt-met, Poland

Use

The screws are designed for joining load-bearing timber structures – solid timber, glulam, CLT and LVL panels, as well as particle board. The countersunk head sits flush with the timber surface, giving a clean, neat joint.

Toode recommends these screws for fixing external gutter brackets – the ceramic coating gives long-lasting durability in damp outdoor conditions, and the countersunk head does not stand out on the surface of timber facade elements.


Need help choosing screws or fixings?

Contact our specialists or browse our full range of roofing screws.

Contact our sales team →
View all roofing screws and rivets →


The ceramic coating gives long-lasting corrosion resistance in outdoor and damp conditions – exactly what is needed where the screw is regularly in contact with water and the weather. The countersunk head sits flush with the timber surface and does not prevent the bracket from fitting tightly.

A ceramic coating is a modern corrosion protection solution which gives outdoor protection comparable to corrosion class C4. It is more scratch resistant than ordinary zinc plating.

Usually not – the milling point and double thread let the screw go into the timber without pre-drilling. For harder timber or screwing close to an edge, we recommend drilling a pilot hole first to avoid splitting the wood.

Yes – we sell the screws in any quantity. You do not have to buy a full pack.

The screws are suitable for solid timber, glulam, CLT and LVL panels, as well as particle board. They are approved for load-bearing timber structures under ETA-18/0817.