Roofing screws 4.8 x 28 mm

ETANCO farmer screws for roofing – 4.8 × 28 mm, GT F2, 12 Dura Zinc, painted

ETANCO GT F2 4.8 × 28 mm are self-drilling roofing screws with an integrated aluminium washer and EPDM seal, designed for fixing metal roof sheets. The screws are painted with a polyester coating at least 50 µm thick and are available in many RAL colours, so the joint matches your roofing. Packed 250 pcs, but the screws can be bought in any quantity – you do not have to buy a full pack.


Main properties

  • Size: 4.8 × 28 mm
  • Type: GT F2 – self-drilling, no pre-drilling needed
  • Head type: Hex head
  • Drive: Hex bit
  • Material: Hardened steel, zinc plated – 12 Dura Zinc (min. 12 µm)
  • Washer: Integrated aluminium washer with EPDM seal
  • Colour: Polyester coating min. 50 µm – available in many RAL colours
  • Corrosion class: C1–C3 (painted)
  • Standard: ETA-12/0580
  • Packaging: 250 pcs – smaller quantities also available as needed
  • Manufacturer: ETANCO, Poland

Use

The screws are designed for fixing metal roof sheets. The integrated EPDM seal gives a sealed joint and prevents moisture getting in through the screw hole.

The screws are self-drilling – no pre-drilling needed. Recommended tool: a cordless screwdriver with a hex bit.


The screws are available in many RAL colours – to match the shade of your roofing!

Contact our specialists about available colours and quantities.

Contact our sales team →
View all roofing screws and rivets →


ETANCO GT F2 screws are available in a wide range of RAL colours to match the shade of your roofing exactly. Contact our sales team about available colours – we will help you find the right match.

Yes – we sell the screws in any quantity. You do not have to buy a full pack. If you need a small quantity for repairs or additions, just tell us how many pieces you want.

GT F2 is the screw type – a self-drilling screw with a reduced drill point for fixing metal sheets. 12 Dura Zinc means the screw is electro-galvanised with at least 12 µm of zinc – this is the basic corrosion protection layer, which is then covered with paint.

The integrated aluminium washer with EPDM seal gives a sealed joint – the sheets are fixed and the hole stays watertight at the same time. EPDM is an elastomer that withstands temperature changes and UV radiation, so the seal does not lose its elasticity over the years.

No – GT F2 are self-drilling screws that drill and tap at the same time. No pre-drilling is needed. We recommend a cordless screwdriver with a hex bit and a medium torque setting, so as not to overload the EPDM seal.

Tighten the screw so that the EPDM seal is slightly compressed and gives a sealed joint – but not so tight that the seal is damaged or the sheet deformed. We recommend setting the screwdriver to a medium torque and checking the first screw visually.