Universal roof railing 0.6 m

Universal roof railing from the Finnish manufacturer ORIMA – 0.6 m high, for soft (bitumen) roofing and metal tile profiles. The posts have a base plate with a diagonal brace, screwed to the roof with 7×50 self-drilling screws, and there are two oval tubes between the posts. The SYPL version has a built-in snow guard.

ORIMA universal roof railing on a soft roof

Universal railing on a soft roof.

Models

Model Height Snow guard Tubes per 3 m module
SYP 0,6 m no 2
SYPL 0,6 m yes 4

For metal tiles, a railing with posts fixed to the battens is also available – SYV and SYO (0.6 m and 1.1 m).

Technical data

Roofing soft (bitumen) roofing, metal tile profile
Height 0.6 m (656 mm with the fixing)
Fixing post base plate (375 mm) with 7×50 self-drilling screws and sealing washers
Distance between posts no more than 1.5 m
Module length 3 m (oval steel tubes)
Material hot-dip galvanised steel with powder coating
Colours colours of the TOODE RR colour chart, other colours to individual order
Screws M8, strength class 8.8
Manufacturer ORIMA (Finland), CE marking

Set contents (one 3 m module)

Part SYP SYPL
Oval tube 3.0 m 2 4
Roofing bracket (post) 3 3
Snow guard bracket – 4
Loop bracket 6 12
Screw M8×25 6 12
Screw M8×35 4 8
Nut M8 10 20
Sealing washer 6 6
Self-drilling screw 7×50 9 9

Installation

  1. Position the posts

    The posts are placed along the edge of the roof no more than 1.5 m apart.

  2. Screw to the roof

    The post base plate and diagonal brace are screwed to the roof with 7×50 self-drilling screws with sealing washers.

  3. Install the tubes

    The oval tubes are fixed to the posts with loop brackets, M8 screws and nuts (strength class 8.8). For a longer railing, the tubes are joined.

Installation on a thick bitumen roof

If bitumen roll roofing is laid on insulation and a profiled steel deck, the railing posts are fixed to a special fixing plate that is melted into the top layer of the roofing. The ORIMA installation instructions specify:

  • the fixing plate with M8×20 locking screws and flange nuts is melted into the top layer of roofing felt, with bitumen applied on both sides of the plate;
  • the plate is fixed to the roof with 6×200 universal screws with washers – they must be long enough to go through the insulation and screw securely into the profiled deck;
  • a strip of top-layer roofing felt is laid over each fixing point;
  • after the strip is laid, the nuts are removed, the posts are placed and the nuts are tightened again.

Roof railing on a soft roof - the post fixings are covered with strips of roofing

Railing on a soft roof: the post fixings are covered with strips of roofing.

This kind of fixing must be agreed with the roofing contractor – ask a TOODE consultant about the parts you need.

TOODE supplies the railings; they are installed by a roofer. Installation instructions – under the “Documents” tab.

With or without a snow guard

Models with the letter L at the end of the code (for example SYPL) have two extra tubes at the bottom of the railing that act as a snow guard – they hold back snow and ice so it does not slide off the roof. This version is chosen if there is an entrance, path, terrace or parking space below the edge of the roof. Then no separate snow guard is needed there.

Colours and ordering

The railings are available in the colours of the TOODE RR colour chart, other colours to individual order. For a quote, give the roofing type, the length needed, the height (0.6 or 1.1 m), the colour and whether you need the version with a snow guard.

TOODE supplies the railings; they are installed by a roofer. Installation instructions for each model are under the “Documents” tab, and dimensioned drawings are sent on request.

Which railing suits your roof?

The railing structure is similar for all models – the difference is the fixing, which must be chosen according to the roofing.

Roofing Models How it is fixed
Standing seam profile and Classic SYR, SYRL, SYN, SYNL onto the seam, without drilling the roofing
Metal tile profile, corrugated asbestos-free sheets SYV, SYVL, SYO, SYOL to the battens through the roofing, with spacers and sealing washers
Trapezoidal and other profiled roofing SYT, SYTL, SYS, SYSL onto the roofing profile, screw points sealed with sealing tape
Soft (bitumen) roofing and metal tiles SYP, SYPL (0,6 m) posts with a base plate, screwed to the roof

Soft (bitumen) roofing and metal tile profiles. It is 0.6 m high and also available with a snow guard (SYPL).

Yes, in that case the posts are fixed to a special plate that is melted into the top layer of the roofing and fixed to the profiled deck with long screws. This solution must be agreed with the roofing contractor.

For a quote, give the length, colour and whether you need the version with a snow guard.

In the colours of the TOODE RR colour chart, and in other colours to individual order.

ORIMA installation instructions with an installation diagram and parts list. We will send dimensioned drawings on request – ask a TOODE consultant.

Installation instructions