Roof safety railing for trapezoidal roofs

Roof safety railing for the trapezoidal profile from the Finnish manufacturer ORIMA – for trapezoidal and other profiled metal roofs. The railing brackets are screwed directly to the roofing profile – 10 self-drilling 7×30 screws per bracket – and the screw points are sealed with sealing tape so that the roof stays watertight. Available 0.6 m and 1.1 m high, both heights also with a built-in snow guard.

ORIMA roof railing with a snow guard on a trapezoidal profile roof

Railing with a snow guard on a trapezoidal roof.

Models

Model Height Snow guard Tubes per 3 m module
SYT 0,6 m no 2
SYTL 0,6 m yes 4
SYS 1,1 m no 3
SYSL 1,1 m yes 5

Technical data

Roofing trapezoidal and other profiled metal roofing
Height 0.6 m or 1.1 m
Fixing onto the roofing profile, 10 self-drilling 7×30 screws per bracket, screw points sealed with sealing tape
Distance between brackets no more than 1.2 m
Roof pitch no more than 45°
Module length 3 m (oval steel tubes)
Material hot-dip galvanised steel with powder coating
Colours colours of the TOODE RR colour chart, other colours to individual order
Screws M8, strength class 8.8
Manufacturer ORIMA (Finland), CE marking

Set contents (one 3 m module)

Part SYT SYTL SYS SYSL
Oval tube 3.0 m 2 4 3 5
Roofing bracket 6 6 6 6
Vertical post 4 4 4 4
Diagonal brace 4 4 4 4
Screw M8×16 4 4 4 4
Screw M8×35 6 10 8 12
Nut M8 10 14 12 16
Self-drilling screw 4.8×20 12 12 16 16
Self-drilling screw 7×30 60 60 60 60
Sealing tape 1,8 m 1,8 m 1,8 m 1,8 m

Installation

  1. Position the brackets

    The brackets are placed along the edge of the roof no more than 1.2 m apart. Roof pitch – no more than 45°.

  2. Screw to the roofing

    Each bracket is screwed to the roofing profile with 10 self-drilling 7×30 screws. The screw holes are sealed with sealing tape.

  3. Install the posts and tubes

    The vertical posts and diagonal braces are screwed to the fixings; the angle is adjustable. The oval tubes are screwed on with M8 screws and nuts (strength class 8.8).

Installation instructions – under the “Documents” tab. TOODE supplies the railings; they are installed by a roofer.

With or without a snow guard

Models with the letter L at the end of the code (for example SYTL and SYSL) have two extra tubes at the bottom of the railing that act as a snow guard – they hold back snow and ice so it does not slide off the roof. This version is chosen if there is an entrance, path, terrace or parking space below the edge of the roof. Then no separate snow guard is needed there.

If you only need a snow guard, choose trapezoidal/universal snow guards. For moving safely on the roof – roof ladders and the roof walkway for trapezoidal roofs.

Colours and ordering

The railings are available in the colours of the TOODE RR colour chart, other colours to individual order. For a quote, give the roofing type, the length needed, the height (0.6 or 1.1 m), the colour and whether you need the version with a snow guard.

TOODE supplies the railings; they are installed by a roofer. Installation instructions for each model are under the “Documents” tab, and dimensioned drawings are sent on request.

Which railing suits your roof?

The railing structure is similar for all models – the difference is the fixing, which must be chosen according to the roofing.

Roofing Models How it is fixed
Standing seam profile and Classic SYR, SYRL, SYN, SYNL onto the seam, without drilling the roofing
Metal tile profile, corrugated asbestos-free sheets SYV, SYVL, SYO, SYOL to the battens through the roofing, with spacers and sealing washers
Trapezoidal and other profiled roofing SYT, SYTL, SYS, SYSL onto the roofing profile, screw points sealed with sealing tape
Soft (bitumen) roofing and metal tiles SYP, SYPL (0,6 m) posts with a base plate, screwed to the roof

Each bracket is screwed to the roofing profile with 10 self-drilling 7×30 screws, and the screw holes are sealed with sealing tape. Distance between brackets – no more than 1.2 m.

Trapezoidal and other profiled roofing with a pitch of up to 45°.

For a quote, give the length, height (0.6 or 1.1 m), colour and whether you need the version with a snow guard.

In the colours of the TOODE RR colour chart, and in other colours to individual order.

ORIMA installation instructions with an installation diagram and parts list. We will send dimensioned drawings on request – ask a TOODE consultant.

Installation instructions