Wall ladder safety cage for 450 mm ladders
Hangar, TP45, RR33 Black See how it looks on a building Ladder safety cage in the roof visualiser - choose the colour, rainwater system and accessories.

The wall ladder safety cage is designed for installation on TOODE 450 mm wide wall ladders. It creates an enclosed climbing area around the ladder and helps make climbing a fixed wall ladder safer.

The safety cage is made of interlocking 1200 mm high sections. The inner diameter of the cage hoop is 750 mm. The ladder system components are available in the colours of the TOODE RR catalogue, and in other colours to individual order.


Safety cage 1200 mm starter section


Wall ladder safety cage set for 450 mm ladders with part numbers

The picture shows the components needed to build one 1200 mm high starter section of the safety cage. Click on the picture to enlarge it.

  1. Safety hoop for 450 mm ladders – one 1200 mm starter section needs two hoops: a lower and an upper one. The inner diameter of the hoop is 750 mm.
  2. Ladder safety cage upright, L = 1200 mm – one section needs seven uprights. They are installed inside the safety hoops at equal distances and perpendicular to the hoops.
  3. Diagonal brace – the starter section needs two braces. They connect the lower hoop of the cage to the ladder frame, hold the hoop in position and stabilise the bottom of the cage. Diagonal braces are only needed at the lower hoop of the cage, so they are not repeated in each following 1200 mm section.
  4. M10 × 500 mm threaded rod set – an M10 × 500 mm threaded rod with two M10 nuts and two washers. The starter section needs three sets: one for connecting each safety hoop to the ladder and one for fixing the upper ends of both diagonal braces to the ladder.

Installing the starter section also requires:

  • 14 pcs M8 × 25 screws with nuts for fixing the seven uprights to both safety hoops and for fixing the two diagonals (they use the screws for the uprights);

Need help putting together a safety cage?

Work out the cage height you need, and TOODE specialists will help you calculate the number of sections, fixings and connectors needed.

Contact our sales team →


Extending the safety cage

Each following section increases the height of the safety cage by 1200 mm. The extension uses the upper safety hoop of the previous section, so each extra section needs only one new hoop.

Each following 1200 mm section needs:

  • 1 safety hoop for 450 mm ladders;
  • 1 M10 × 500 mm threaded rod set with two M10 nuts and two washers;
  • 7 ladder safety cage uprights, L = 1200 mm;
  • 7 pcs M8 × 25 screws with nuts for fixing the uprights to both hoops.

No extra diagonal braces are needed for extension sections – the two diagonal braces are installed once at the lower hoop of the whole cage.


Installation diagram


Wall ladder safety cage installation diagram for 450 mm ladders

The diagram shows the positions of the safety hoops, uprights, diagonal braces and fixings on the wall ladder. Click on the picture to enlarge it.

  • The safety hoops are installed at 1200 mm intervals and fixed through the ladder rungs with M10 × 500 mm threaded rods.
  • The lower safety hoop must be at a height of 2200-3000 mm above the starting level.
  • The seven uprights are placed inside the hoops at equal distances and fixed with M8 × 25 screws and nuts.
  • The two diagonal braces are fixed to the lower safety hoop with M8 × 25 screws (at the same points where the uprights are fixed), and their upper ends are fixed to the ladder frame with one M10 × 500 mm threaded rod set.
  • If the cage reaches the upper hoops of the wall ladder, the upper safety hoop is fixed to them with M8 × 40 screws and nuts.

The safety cage can be installed either when the wall ladder is installed or after an existing ladder has been installed. When installing a safety cage on a ladder, extra pairs of wall brackets must also be planned to suit the specific structure.


Technical information

  • Designed for: TOODE 450 mm wide wall ladders
  • Height of one section: 1200 mm
  • Inner diameter of the safety hoop: 750 mm
  • Number of uprights per section: 7 pcs
  • Vertical spacing of the safety hoops: 1200 mm
  • Installation height of the lower hoop: 2200-3000 mm above the starting level
  • Surface coating: Z275 zinc coating and powder coating
  • Colour choice: TOODE RR catalogue colours; other colours to individual order

Compliance and declared performance

According to TOODE data, the wall ladder safety cage complies with the RT 85-11132 requirements, and its dimensions comply with standard EN ISO 14122-4:2016.

In the technical data sheet for TOODE TB type wall ladders, the ladders are intended for access to the roof of a building or another platform. The data sheet applies to wall ladders on which a safety cage is installed and gives the following ladder system performance:

  • Test standards: RT 85-11132 and EN 12951:2004, system 3
  • Mechanical strength: C1 and C2 according to EN 12951:2004
  • Reaction to fire: class A1
  • External fire performance: deemed to satisfy class Broof
  • Durability: Z275 zinc coating and about 80 µm powder coating layer

The performance declared in the technical data sheet applies to TOODE wall ladders, not to the safety cage as a separately tested product. The solution for a specific site, whether a cage is needed, the total height and the number of fixings must be determined according to the project, the intended use and the requirements that apply to the site.


Need help choosing a wall ladder and safety cage?

Contact our sales team →

See TOODE roof and wall ladder solutions:

Roof and wall ladders →

Need extra ladder wall brackets?

Wall bracket set →

Need an upper ladder hoop set?

Upper hoop set →

The safety cage around a fixed wall ladder creates an enclosed climbing area and helps make climbing the ladder safer. This model is designed for TOODE 450 mm wide wall ladders.

One section is 1200 mm high, and the inner diameter of the safety hoop is 750 mm. Each section uses seven 1200 mm long uprights.

Yes. The cage can be extended in 1200 mm sections. Each following section needs one safety hoop, one M10 × 500 mm threaded rod set, seven uprights and 14 M8 × 25 screws with nuts.

No. The two diagonal braces are installed once at the lower hoop of the whole cage. They connect the lower hoop to the ladder frame and stabilise the bottom of the cage. No extra diagonal braces are needed for extension sections.

According to the TOODE installation instructions, the lower safety hoop must be at a height of 2200-3000 mm above the starting level.

Yes. The safety cage can be installed either when the wall ladder is installed or after the ladder has been installed. The suitability of the existing ladder, the wall brackets and the whole structure for the planned solution must be checked.

Yes, the TOODE installation instructions require extra pairs of wall brackets when a safety cage is installed on a wall ladder. The exact number and position of the brackets must be determined according to the wall structure and the specific site.

The safety cage is available in the colours of the TOODE RR catalogue, and in other colours to individual order.

According to the TOODE installation instructions, the safety cage complies with the RT 85-11132 requirements, and its dimensions comply with standard EN ISO 14122-4:2016. The technical data sheet for TOODE TB type wall ladders also gives testing according to RT 85-11132 and EN 12951:2004, system 3. The ladder performance declared in the data sheet is mechanical strength C1 and C2, reaction to fire A1, external fire performance class Broof, Z275 zinc coating and about 80 µm powder coating layer. This declared performance applies to the wall ladders, not to the safety cage as a separately tested product. The requirements of the building project and the applicable regulations must always be followed on the specific site.