Roofing screws 4.8 x 20 flat TORX

ETANCO stitching screws for joining roof sheets – 4.8 × 20 mm, GTF P, 20 Dura Zinc, painted

ETANCO GTF P 4.8 × 20 mm are self-drilling stitching screws with a round head and rubber seal, designed for joining profiled metal roof sheets to each other – sheet to sheet. The 20 mm length is ideal for metal-to-metal joints where the screw does not need to reach the timber substructure. The 20 Dura Zinc plating (min. 20 µm) gives better corrosion resistance than standard 12 µm plating. The screws are available in many RAL colours. Packed 250 pcs, but can be bought in any quantity.


Main properties

  • Size: 4.8 × 20 mm
  • Type: GTF P – self-drilling, no pre-drilling needed
  • Head type: Round head with integrated rubber seal
  • Material: Hardened steel, zinc plated – 20 Dura Zinc (min. 20 µm)
  • Colour: Available in many RAL colours
  • Standard: ETA-12/0580
  • Packaging: 250 pcs – smaller quantities also available as needed
  • Manufacturer: ETANCO, Poland

Use

GTF P 4.8 × 20 mm screws are designed for joining profiled metal roof sheets to each other – at the overlaps, where the screw does not need to reach the timber battens. The round head with rubber seal sits tightly on the sheet surface and gives a watertight joint.

The screws are self-drilling – no pre-drilling needed. Recommended tool: a cordless screwdriver with a TORX bit.


The screws are available in many RAL colours – to match the shade of your roofing!

Contact our specialists about available colours and quantities.

Contact our sales team →
View all roofing screws and rivets →


Both screws have a round head and rubber seal. The 20 mm version is for joining metal sheets to each other – sheet to sheet, without a timber substructure. The 28 mm version is longer and is for fixing the sheet to timber battens. Another difference: the 20 mm version has better zinc plating – 20 Dura Zinc versus 12 Dura Zinc.

Both screws are the same length and are designed for joining metal sheets to each other. The difference is the head – GTF P has a round head with a rubber seal, GTO 2 has a hex head with an EPDM seal. The GTF P round head is lower and less visible, while the GTO 2 hex head allows a higher tightening torque.

GTF P 4.8 × 20 mm screws are available in a wide range of RAL colours. Contact our sales team about available colours – we will help you find the right match for your roof.

Yes – we sell the screws in any quantity. You do not have to buy a full pack.