Wall plug for downpipe double-threaded screw

Wall plug for downpipe bracket fixing – Wkręt-met KPX 10 × 50 mm

Wkręt-met KPX 10 × 50 mm is a universal polypropylene three-way expansion wall plug with anti-rotation fins, designed for securing downpipe bracket fixing screws in the wall – including M8 double-threaded fixing screws. The three-way expansion gives a reliable grip in brick, concrete and aerated concrete block walls. The anti-rotation fins stop the plug from turning while drilling and while driving the screw. Packed 300 pcs, available in any quantity.


Main properties

  • Size: ø10 × 50 mm
  • Required drill hole diameter: 10 mm
  • Material: Polypropylene
  • Expansion: Three-way – a stable grip on all sides
  • Anti-rotation fins: Stop the plug from turning during installation
  • Suitable wall materials: Brick, concrete, aerated concrete blocks
  • Suitable screw: M8 double-threaded fixing screw (SDM-D-TX/6)
  • Packaging: 300 pcs – smaller quantities also available as needed
  • Manufacturer: Wkręt-met, Poland

Installation

  1. Drill a ø10 mm hole in the wall to the required depth
  2. Insert the KPX plug – the anti-rotation fins hold it in place
  3. Drive the wood-thread end of the M8 double-threaded screw into the plug with a TX bit
  4. The plug expands in three directions and anchors firmly in the wall
  5. Fix the downpipe bracket onto the protruding M8 metric thread end

Need help choosing fixings?

Contact our specialists – we will help you choose the right plug and screw for your wall material.

Contact our sales team →
View all roofing screws and rivets →


Ordinary plugs expand in only one or two directions. Three-way expansion gives a more even distribution of force and a stronger grip in the wall material – especially important when the plug is set in aerated concrete or lightweight masonry, where pressure from one side can crack the material.

The outside of the plug has small ribs that bite into the wall material when it is inserted. This stops the plug turning when the screw is driven in – without them the plug could spin with the screw instead of anchoring in the wall.

The KPX plug is suitable for solid brick masonry, concrete and aerated concrete blocks. For hollow bricks or larger cavities, we recommend asking our sales team about a more suitable plug type.

Yes – we sell the plugs in any quantity. You do not have to buy a full pack.