Roofing screws 6.5 x 50 mm

ETANCO self-drilling screws for snow guards, roof walkways and ladders – 6.5 × 50 mm, GT A, 12 Dura Zinc, painted

ETANCO GT A 6.5 × 50 mm are the same type of screws as GT A 6.5 × 38 mm, but longer – for cases where the roofing thickness calls for deeper penetration. Toode supplies these screws as the standard fixing for installing snow guards, roof walkways and roof ladders on thicker roofing – for example Eternit (asbestos-free fibre cement) roofs. The screws are available in many RAL colours. Packed 100 pcs, but can be bought in any quantity.


Main properties

  • Size: 6.5 × 50 mm
  • Head type: Hex head, 3/8″
  • Washer: Steel washer with EPDM seal (Z16)
  • Material: Hardened steel, zinc plated – 12 Dura Zinc (min. 12 µm)
  • Colour: Available in many RAL colours
  • Penetration depth in timber: 30 mm
  • Max. thickness of material drilled through: up to 16 mm
  • Packaging: 100 pcs – smaller quantities also available as needed
  • Manufacturer: ETANCO, Poland

Use

The screws are designed for fixing mounting brackets through thicker roofing to timber battens. Because of their length they are particularly suitable for Eternit (asbestos-free fibre cement) roofs, where the sheet thickness does not allow standard 38 mm screws – the 50 mm version gives sufficient penetration into the timber battens even through a thick roofing layer.

The 6.5 mm diameter and hex head give high pull-out resistance under load. The EPDM seal seals the screw hole and prevents moisture getting in. The screws are self-drilling – no pre-drilling needed. Recommended tool: a cordless screwdriver with a 3/8″ hex bit.


The screws are available in many RAL colours – to match the shade of your roofing!

Contact our specialists about available colours and quantities.

Contact our sales team →
View all roofing screws and rivets →


Both screws are from the same range with identical heads, washers and zinc plating. The difference is the length – the 50 mm version can drill through thicker materials (up to 16 mm) and gives sufficient penetration into the timber battens through thicker roofing too, such as Eternit sheets. If the roof is made of profiled metal sheets, the 38 mm version is usually enough.

GT A 6.5 × 50 mm screws are available in a wide range of RAL colours to match the shade of your roofing exactly. Contact our sales team about available colours.

Yes – we sell the screws in any quantity. If you need to work out the exact quantity for your roof, contact our sales team.

Because of the more porous structure of the material, Eternit sheets are more prone to moisture getting in through the edges of the drill hole. The EPDM seal under the steel washer gives a tight seal that protects the timber battens and reduces the chance of water getting under the roofing.

We recommend drilling a pilot hole in Eternit sheets before screwing, to avoid cracking the sheet. In the timber battens the screw drills its own way – no additional pre-drilling is needed.