Transparent roof sheet TP20 and TP45 - Halle Lux
Hangar, TP45, RR33 Black See how it looks on a building Halle Lux skylight strips in the roof visualiser - choose the colour, rainwater system and accessories.

Halle Lux translucent sheets are profiled glass-fibre reinforced polyester (GRP) sheets designed to let natural daylight into roof and wall structures. TOODE offers versions for use with the trapezoidal roof profiles TP20 R and TP45 R.

If you are looking for a transparent roof sheet for a hangar, warehouse, production or agricultural building, Halle Lux lets you create translucent areas in the roofing while keeping the shape and joining principle of a profiled metal roof.

The sheets are 5000 mm long, made with 450 g/m² glass-fibre reinforcement and are about 1 mm thick. The manufacturer declares about 80% visible light transmission at delivery. The material is milky white and diffuses light, so the room gets natural light without the direct see-through effect of a fully clear sheet.


Transparent roof sheets for TP20 and TP45 profiles

Halle Lux sheets are profiled so that they can be used together with profiled metal sheets. The TOODE range includes solutions for the TP20 R and TP45 R profiles, so steel roofing and translucent areas can be combined in one roof slope.

This solution is especially suitable for larger buildings, where natural light can be used during the day and the need for artificial lighting reduced.

Halle Lux technical specifications

Manufacturer Halle System AB
Product group Halle Lux
Material Glass-fibre reinforced polyester (GRP)
Use Daylight areas in roofs and walls
Compatible TOODE profiles TP20 R and TP45 R
Sheet length 5000 mm
Glass-fibre reinforcement 450 g/m²
Approximate thickness 1 mm
Light transmission about 80% at delivery
Appearance Milky white, translucent and light-diffusing
UV protection UV protective film on both sides of the sheet
Polyester grade Standard – fire-retardant polyester
Reaction to fire Class E according to EN 13501-1
External fire performance of roofs BROOF(t1) and BROOF(t2)
Recommended minimum temperature −40 °C
Maximum temperature without load +120 °C

Halle Lux 1 mm profiled GRP sheets have a manufacturer’s declaration of performance according to SS-EN 1013:2012.


Glass-fibre reinforced GRP – a stable solution for a metal roof

Unlike simple unreinforced plastic sheets, in Halle Lux the polyester is reinforced with a glass-fibre mat. The glass-fibre reinforcement increases the stiffness and mechanical stability of the sheet.

This is important when the translucent sheet is installed in the same roof slope as profiled steel roofing. The linear thermal expansion coefficient of Halle Lux is about 20-25 × 10−6/K, which corresponds to a length change of about 1 mm per metre of sheet with a temperature difference of 40 °C.

The manufacturer states that unreinforced thermoplastics, such as PVC and polycarbonate, have much higher thermal expansion. That is why GRP is an especially suitable solution for profiled daylight areas in metal roofs.


TP20 and TP45 profile dimensions

The drawing below shows the main trapezoidal profile dimension labels. The tables under the drawing give the nominal dimensions of the TOODE TP20 R and TP45 R metal profiles that the corresponding Halle Lux daylight sheet versions are matched to.


Profile dimension drawing of TP20 and TP45 translucent sheets

Drawing labels: A – profile height; B – width of the trapezoid top; C – width of the profile bottom; D – profile pitch; E – cover width.

TP20 R profile dimensions

A – profile height 18 mm
B – top width 27 mm
C – bottom width 79 mm
D – profile pitch 137,5 mm
E – cover width 1100 mm

TP45 R profile dimensions

A – profile height 41 mm
B – top width 37 mm
C – bottom width 63 mm
D – profile pitch 150 mm
E – cover width 900 mm

Halle Lux joined with the TOODE TP20 R roof profile

The profile shape of the Halle Lux daylight sheet lets it be worked into the same roof slope as TOODE profiled steel sheets. Below is the joint between a Halle Lux translucent sheet and the TOODE TP20 R metal roof profile.


Transparent Halle Lux roof sheet joined with the TOODE TP20 R metal roof profile

The matching profile lets the translucent sheet overlap with the profiled steel roofing, creating a continuous roof slope and daylight area without a separate window structure.


UV protection and light transmission

Halle Lux sheets have a UV protective film on both sides. It helps reduce yellowing and erosion of the surface and keeps the light transmission and smooth surface of the sheet for longer.

The light transmission given in the manufacturer’s technical documentation for a new Halle Lux sheet is about 80%. The milky white material diffuses light, so it is suitable for rooms that need more even natural lighting.

The sheets can be cleaned with a mild synthetic detergent, a soft brush and plenty of water.


Installation and overlaps

Halle Lux sheets are designed to be installed together with profiled roof and wall materials. In roof structures, the side joint is usually made with a profile overlap.

The end overlap of roof sheets must be at least 200 mm, and in wall structures at least 100 mm. For roofs with a pitch below 14°, the manufacturer recommends additionally sealing the fixed side and end overlaps. For this the manufacturer recommends an acid-free silicone sealant.

When using Halle Lux together with metal sheets, the choice of fixings must take into account the installation requirements of the specific metal profile. Halle Lux sheet fixings are placed in the valley of the profile.

Where possible, the manufacturer recommends using roof daylight sheets in one length from the ridge to the eaves, reducing the number of end overlaps and potential points where water could get in.

Important! 450 g/m² Halle Lux sheets are not designed to be walked on. During installation and roof maintenance, ladders, roof walkways or load-spreading work platforms must be used.


Cutting and storage

Halle Lux sheets can be cut and drilled with ordinary woodworking tools. For cutting, the manufacturer recommends a fine-toothed saw held at a slight angle to the sheet.

During storage the sheets must be protected from rain and direct sun. The packs should be stored at an angle in a dry, ventilated place, so that water cannot collect between the sheets for long.


Related products

Halle Lux translucent sheets are designed for use with the matching TOODE trapezoidal roof profiles.


Trapezoidal profile TP20


Trapezoidal profile TP45


All roof and wall profiles

Would you like to use translucent sheets in your roof or facade project?

Contact TOODE specialists – we will help you choose the TP20 or TP45 solution, work out the number of sheets needed and find the other components of the roof system.

Contact our sales team

Halle Lux is a profiled sheet made of glass-fibre reinforced polyester, or GRP. It is designed to let natural light into roof and wall structures and is profiled to match metal roof profiles.

Halle Lux is often searched for as a transparent roof sheet, but technically it is a milky white, translucent GRP sheet. It is not fully clear, but diffuses the daylight coming through it. The manufacturer states about 80% light transmission at delivery.

TOODE offers Halle Lux translucent sheets for use with the trapezoidal roof profiles TP20 R and TP45 R. The cover width of TP20 R is 1100 mm, and of TP45 R 900 mm.

The Halle Lux TP20 and TP45 daylight sheets offered by TOODE are 5000 mm long.

Halle technical documentation states about 80% visible light transmission at delivery. The milky white material diffuses light rather than acting as fully clear glazing.

No. Halle Lux is made of glass-fibre reinforced polyester, or GRP. The glass-fibre reinforcement makes the sheet stiffer, and the material has relatively low thermal expansion, which is an advantage when the daylight sheet is used together with profiled metal roofing.

Yes. Halle Lux sheets have a UV protective film on both sides, which helps reduce yellowing and erosion of the surface and keeps the light transmission of the material for longer.

No. The 450 g/m² Halle Lux sheets offered by TOODE are not designed to be walked on. During installation and roof maintenance, safe ladders, roof walkways or load-spreading work platforms must be used.

For roof structures, the manufacturer specifies an end overlap of at least 200 mm, and for wall structures at least 100 mm. For roofs with a pitch below 14°, the fixed overlaps usually need additional sealing.

Yes. Halle Lux profiled GRP sheets are designed for daylight areas in both roofs and walls. The specific profile and fixing solution must be chosen to suit the building structure.